Will Stevens 44 action parts work in a 414 receiver?
Will Stevens 44 action parts work in a 414 receiver?
Danth,
I am not familiar with the Stevens "414" Model by that designation.
However, I am familiar with the Stevens "Model 44" action ( also known as an 'Ideal') and it is of the "Pivoting Breech Block" type; as it is an enlarged copy of The Stevens 'Favorite' type action.
as such it has a Pivot pin/screw forward of the plane of the Breech face and below the barrel tenon with a Link between the Breech Block and Lever aiding in support of the Breech Block in 'battery' position.
I also have read that the 'Walnut Hill' action is a "Falling Block" type Action in that the Breech Block moves in a linear, nearly vertical, travel when transiting from Battery to Open and back.
So, it would seem, your Question's answer depends upon how your action breech block moves and the relative sizes and shapes of its component parts.
There are others that frequent these forum threads that may answer your Question more fully.
Best Regards,
Chev. William
To answer your question- yes. A 414 Armory is nothing more nor less than a 44.
Now I lay me down to sleep
A gun beside me is what I keep
If I awake, and you're inside
The coroner's van is your next ride
That's right. The Stevens design for the Favorite and 44 (or Ideal) is actually a rolling-block. There is no reason why they couldn't have been made with slight play on the pin and the block making contact with a matching curved surface in the rear of its mortice. But it never was. They are excellent actions for rimfire or equivalent rounds, but nowhere near as strong as the 44½.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |