40/60 Bar Solder. Which is the lead, which is the tin?
40/60 Bar Solder. Which is the lead, which is the tin?
"There's a Fine Line Between Hobby and Mental Illness"!
The 40.
You cannot discover new oceans unless you have the courage to lose sight of the shore
it is usually called 60/40 tin to lead.
But I have seen 40-60 - I think it was used in the auto body business, before lead was outlawed.
Echo
USAF Ret
DPS, 2600
NRA Benefactor
O&U
One of the most endearing sights in the world is the vision of a naked good-looking woman leaving the bedroom to make breakfast. Bolivar Shagnasty (I believe that Lazarus Long also said it, but I can't find any record of it.)
Possibly it's different in US, but here in Germany it's Pb60Sn40.
Dirk
Any solder I've seen is labeled with the tin content first, even lead-free solders have the tin content listed as the first number. I have two old 'rolls' of acid core solder in my tool box labeled as 40/60 (40% tin / 60% lead) and 30/70 (30% tin / 70% lead).
The Kester company lists tin/lead 'bar' solder in several alloys, 63/37, 60/40, 55/45, 50/50, 45/55, 40/60, 35/65, 30/70, 25/75, 20/80 and 10/90.
So if your bar solder is labeled or stamped 40/60 it's probably 40% tin.
I rest my case.
You cannot discover new oceans unless you have the courage to lose sight of the shore
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |