anybody tried wc844 in thier 30/30? i loaded 20rds with 31.5gr wc844,fed mag primer and 150gr round nose jacketed soft point. gonna try them out i will let you know how it goes.
anybody tried wc844 in thier 30/30? i loaded 20rds with 31.5gr wc844,fed mag primer and 150gr round nose jacketed soft point. gonna try them out i will let you know how it goes.
That is the powder of choice for average outings. Maximum power needs 748, the slowest version of the 335/BLC2 military powders in civilian names. I have yet to hear about 748 speed amongst the 844/846 series. It seems as though powder is made to match 748 with tolerances only made for the fast side. If on the fast side in reality, then the lot is prolly used for the military contracts according to either 844(335) or 846(BLC2) specs. ... felix
felix
Hi: I have used 31 gr wc844 with Winchester 150 gr flat nose bullets in Winchester cases in my 1954 mod 94 Winchester... I have loaded up to 33 gr but settled on 31.. Good accuracy and functioning.. Mike
Hey Mike!
Good to see you on hereStop over and I'll send you home with some nice cast boolits for that .30-30.
Jeff P
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |