Wanting to get some input from those who have done it. A few questions.
Most do this to use in conjunction with the Lee sizers. Has anyone done this and used it with the NOE sizers?
As far as mounting, my bench is not friendly to it. The front of my bench is not open, so simply mounting it under the front lip of the bench is not possible. What I'm considering is mounting the press to a piece of wood that extends out from the press base itself a bit, and then bolting / C-clamping / whatever to my bench. Given that a press itself can be heavy and sizing can involve applying significant force to the press, the wood mount is obviously going to have leverage against it. How thick of a board would I need?
As for the press itself, I have an RCBS Rock Chucker but it's honestly too much of a beast for this. I was considering getting one of those $40 C frame Lee presses and using it as a dedicated tool. Later down the road, I might attach a pneumatic cylinder to the ram...because, you know. Lazy
Before anyone suggests using a metal mount, I have no capability to make one. Any idea that starts out with "get your welder and metal saw..." is not going to happen. This is me we're talking about here