I know this is a long shot but here goes. My sob story goes like this, Desperate need of a distributor for a 2.0/2.4 sohc (belt drive sohc). have a 88 d50 2wd with an excellent body, came from southern california, never wrecked, soild truck. wanted to fix it up for a reliable work truck but had a cracked head. tried replacing cracked head on what i thought was a 2.4, got a salvage yard head from a 2.4 but had way larger combustion chambers, realized my engine was a 2.0, couldn't find a 2.0 head anywhere so i got a 2.4 from a 92 mitsubishi pickup. bored .5 mm over, crank work, bearings, gaskets, seals, deleted the balance shafts, oil pump, everything but the head. the machine shops head guy was on vacation so when he got back and started to rebuild the head we found it was cracked also. of course the short block was completely done and assembeled by now. tired of cracked heads i got a new stripped head from rock auto, now with the head work complete, engine assembeled with new moly rings, water pump, pilot and clutch release bearing, etc to include a weber replacement carb, went to bolt on the transmission and the newer block is a wide style, my old transmission is a narrow bolt pattern. sourced a wide bolt transmission and while putting everything together in the truck, i somehow zapped the pick up coil, ordered a new pick up coil but the replacement coil from rock auto won't fit. my financal advisor informed me that future funding for the little truck as she calls it is dwindling rapidly. hopefully if someone has one reasonably priced distributor that the budget will allow, please let me know. not wanting a handout, will pay a reasonable price, just if someone has one lying around I sure could use it. thanks for looking.