^MJS, those look good! I organized some brass that needs to be cleaned up.
^MJS, those look good! I organized some brass that needs to be cleaned up.
Resized and wet tumbled about 1,100 pieces of 45ACP brass yesterday.
Was trimming/reaming cases with my Forster case trimmer and finally had enough of the skinny .216" handle on the collet closer and replaced it with a piece of 5/8" aluminum. Drilled a .228" hole though the 4.5" piece of aluminum then milled a 5/8" (couldn't find a 9/16" endmill) recess for the collet closer body. Deburred it, tapped out the skinny handle, slipped on the aluminum cover and then tapped back on the skinny handle to hold it on. Works great and much easier on your hands if you're trimming/reaming a bunch of cases.
general cleanup and putting stuff where it needs to be
Pharted around and loaded about 50 more 9 mm rounds.
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
No time this past weekend, Son got hitched on Saturday, broke down the tents on Sunday and am now dog sitting at his place while the new married couple is do the honeymoon thing. Man life is so good!!!
Je suis Charlie
ΔΕΞΑΙ
Rednecks run the Brits out of this country years ago,
I will defend this country from anyone or thing that tries to take it from me or mine
I AM A REDNECK!!!
"If ever a time should come, when vain and aspiring men shall possess the highest seats in Government,our country will stand in need of its experienced patriots to prevent its ruin." Samuel Adams, 1776
Absolutely nothing.
Hopefully sort the last bucket of wheelweights. 19 down, 1 to go! Prolly going to buy more in a few days, oh boy!
Scored another 30lbs of roofing lead. Hoping to get one more good ingot party before Winter takes over. Gonna swing by later this week and see if they have any more.
Kraken Fan #69
I wish my bench & loading area was that neat.
Looks great!
2nd Amend./U.S. Const. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."
~~ WWG1WGA ~~
Restore the Republic!!!
For the Fudds > "Those who appease a tiger, do so in the hope that the tiger will eat them last." -Winston Churchill.
President Reagan tells it like it is: https://www.youtube.com/watch?v=c6MwPgPK7WQ
Phil Robertson explains the Wall: https://youtu.be/f9d1Wof7S4o
reloaded 25 brass shotgun shells with APP
bit bullet and when on and ordered the RCBS 12 gauge die set as several have been stepped on an otherwise are no longer round
NRA Life
USPSA L1314
SASS Life 48747
RVN/Cambodia War Games, 2nd Place
Half emptied my Lee pot, turning the molten material into boolits for my 9mm. Since I started sizing both the 9mm and .357 to .358 it makes life a bit easier.......
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
Wu Hu, Finally finished sorting 20 buckets of wheelweights! Just in time to go buy some more.
Started to get my Loadmaster changed over to do 9mm. Then I have a lot of 38 spl to do too.
I'm a Red Cross blood donor- are you? Make an appointment to donate today http://www.redcrossblood.org/make-donation
http://www.redcrossblood.org/
FOR Disaster Relief DONATIONS-
http://http://www.redcross.org/charitable-donations
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |