Really impressed with the NOE mold. Cast some up and sized to .309. Loaded with Accurate 1680. Functioned flawlessly in my 300 blackout sbr.
Sent from my SAMSUNG-SM-G891A using Tapatalk
Really impressed with the NOE mold. Cast some up and sized to .309. Loaded with Accurate 1680. Functioned flawlessly in my 300 blackout sbr.
Sent from my SAMSUNG-SM-G891A using Tapatalk
Details please-
I what that mold!!!! In a 5 banger.
Barrel
Load data
Powder
Accuracy at what distance
Sent from my iPhone using Tapatalk Pro
Better jump on that 5 banger now. NOE has them on sale for dang near the price of their 2 banger.
I am getting under 2" groups at 50 yards with a DSG 10.5" barrel, an Aimpoint red dot, and a Dead Air Sandman S suppressor. That's pretty darn good for a red dot. I'm sure I could do better.
The barrel has a 1 in 8 twist. That's off a make shift rest. I haven't tried to push out farther yet.
I am using Accurate 1680 powder loaded to 1050 fps and cut down 5.56 brass. Using range scrap lead.
I'm more than happy with the results so far. Don't think you could go wrong with this mold.
Sent from my SAMSUNG-SM-G891A using Tapatalk
Curious how much diameter (over what your barrel slugs) is your bullet after sizing?
.001, 002,
What powder is that? Eastman Ford Blue?
Yea that's Eastman Ford light blue.
It is .001 over what my barrel slugs at. I have about 300 rounds through it with no leading.
Sent from my SAMSUNG-SM-G891A using Tapatalk
Curious
The mold spec states the bullet is .311.
Does the mold drop them at that diameter with your "range scrap" lead?
They do not have a 5 banger in stock. I was thinking of having Arsenal Molds make a clone and dropping the diameter to .310 and remove the lube groves. Appreciate your feedback.
Yea it drops at .311 with my range scrap lead. I size before and after powder coating.
Sent from my SAMSUNG-SM-G891A using Tapatalk
I grabbed up a lightly used 3 cavity NOE on another site for $40!
The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
Proverbs 1:7
I'll be shooting mine in a RAR bolt gun.
The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
Proverbs 1:7
I have this mold which casts at .311 with my WW+2%. I size to .309 and load with 10 grains of CFEBLK for 1000fps from a 16" 1-8 twist 300Blk.
Make no mistake -- They will remember how easily you surrendered your rights.
The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
Proverbs 1:7
Any more range reports?
What powder are you using?
Curious if anyone is pushing this bullet near MAX and what the accuracy is?
I am waiting on this HTC310-247-FN-BO3 5 cavity PB fingers crossed it works with my 8.5"
Nothing here yet. I did pick up a pound of CFE BLK to try out.
The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
Proverbs 1:7
What barrel make/Twist/Length?
Sent from my iPhone using Tapatalk Pro
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |