Searched high and low and I can't find a parts breakdown of the A2 presses. I have almost everything apart but I can't get the right link arm off. This is the one I'm talking about.
Tried driving the link pin both in and out. I didn't want to really hammer it either way since I don't know which way it's supposed to go. It doesn't have a cotter pin on it like the left side did. This is the pin.
The threaded part of the handle is currently seized in the toggle block. Just waiting for the penetrating oil to do its thing. Everything else came apart fairly easily. Top bushing was my biggest concern but it came right out w/ practically no pressure. Press is in great shape but I will most likely sand blast it and apply a fresh coat of paint. I'm taking it apart to give it a good cleaning and soak all the non frame parts in evaporust to remove any rust and start at square one.