Does Mihec or a known third party offer blank cramer style pins for those wishing to profile their own HP? Drilling and tapping cross pins isn't something I care to take on at the moment.
Does Mihec or a known third party offer blank cramer style pins for those wishing to profile their own HP? Drilling and tapping cross pins isn't something I care to take on at the moment.
Mihec used to offer blank pins so you could create whatever HP style you wanted. But it was just the HP pin. It wasn't the pins that go through the side of the block. Contact him and see if he has any available. I've been able to buy plug pins for used molds that didn't have them.
I'd only really need the main pins, I can always rob the small cross pins from others in the set. I'll contact him.
He outsources the pins and is limited to what he has on hand. If he's out then you may never be able to get them.
I wonder how offended both sides would be if we proposed an NOE group buy for replacement Mihec pins. *Flame on*
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |