Hey all, been a while, Has anyone loaded the SPW wad 20ga with a .44 caliber cast bullet, I plan on loading a 240gr cast .44 cal bullet in a fiocchi 2 3/4", I will be using blue dot powder, 800x, and herco, the load data that comes with the hammerhead slug is 27grs for blue dot, 27grs 800x, and 26grs herco, the total ejection weight with the hammer head slug is 410grs, with the .44 slug the ejection weight would be around 300grs, do you think this would be a safe starting point? currently I load Ajay Maddens .575 round ball in a trap commander BPI wad in a Fiocchi 3" hull with 35grs of blue dot, I also swap the primer with a federal 209a primer, the total weight of the round ball load in wad is 330 335grs, any suggestions? thanks for the help. HC