Pm me your number so I can find it sooner.
It will be next week as I'm vacation spring break with my family at moment, unless it is a quick emergency.
BT
Pm me your number so I can find it sooner.
It will be next week as I'm vacation spring break with my family at moment, unless it is a quick emergency.
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Found your number and got your message, give me a couple days and I'll get back to you as soon as I can.
Brian
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
BTSniper do you have anymore of these Btsimple sets? How much for just the mold and point form die, pm or email to juan916ebay@yahoo.com
Thanks
Last edited by juan916; 04-29-2017 at 12:59 PM.
Yes! I have plenty to offer. Email on the way.
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Brian? Any headway on a "BT Simple" for 5.7 - .308?
Sent from my iPhone using Tapatalk
In the works! Got to order a couple new reamers for ultimate simplicity and perfection.
Brian
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Keep us updated, I just picked up 700rds of 5.7 for $10! (Guy wouldn't go lower because that was the price he'd get for scrap)
Sent from my iPhone using Tapatalk
Hey, what's the speed limit on these rounds?
Speed limits is a deep subject, and possibly part myth when it comes to bullets made form 22lr brass. There are a lot of variables. I have successfully shot 22 cal bullets made from 22lr brass less then 1/2MOA at 3500 FPS from a 223rem but for all day shooting at sage rats I prefer to slow them down to around 3000-3100fps.
I tested and posted pics of groups that shot well with 25.0 grains of TAC and 24.0 grains of H-335. With my BTSniper 22 cal 6s bullets they shot very well with 23.5 grains of H-335.
I'm certain you will find an accurate load before any worry of bullets coming apart.
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Pasted this here from thread on swaging forum.
http://castboolits.gunloads.com/show...-range-results
I just bought me a point form die! Yep.....won't be selling this one. I simply grabbed one of the several 22 cal BTSimple point form dies of the shelf, polished it up and proceeded to make me 700 perfect bullets with it. Not one reject, no folded tips, no lube dimples, nothing but simple perfection! Bullets where all 55 grains with the .092 meplat.
I suspected these bullets had just as much potential as the rest of the 22 cal bullets I have made and shot from 22lr brass with great success and I finally got a chance to get out to the range (woods) and shoot a few. I wanted to find a good load for the up coming annual sage rat shoots here in Oregon. I think this bullet is going to be very impressive on the little varmints with the large HP. I was certainly pleased with the results on paper as I found a couple impressive loads that my gun likes.
Here is the stats.....
Savage short action 223 rem
CBI 26" 12 twist barrel
Old Duramaxx Stock
Sightron scope
Surplus pulled new FC brass still with crimped in primers
55 Gran BTSimple bullets all made from Lapua 22lr brass
Loaded length of 2.165" which equaled about a .020" jump to the lands
Test with H-335 and Ramshot TAC ball powders
110 yrds, light wind from right to left, 55 degrees
There are other powders that would be worth testing for utmost in accuracy but for my high volume loading needs for sage rat shooting I want a ball powder that meters well threw the powder thrower. I got over 13,000 rounds of various 223 and 20 practical rounds loaded up this winter ready, being able to throw an accurate charge with a powder dispenser is a must.
I tested Ramshot TAC from 24.0 to 25.5 grains in half grain increments as well as H-335 from 23.5 to 25.0 grains also in half grain increments. I found that my gun liked 25.0 grains of TAC and 24.0 grains of H-335 with the edge going to the TAC load.
I have always gotten good groups with a mild load of 23.5 grains of H-335 at about 3100 fps with my 6s and 9s 52 to 57 grain bullets made from 22lr brass. Also got good groups with same bullets at a max load with H-335 @ 3500 FPS but for high volume varmint shooting the mild load is better for all day shooting. I suspect these BTSimple bullets also would shoot well at higher velocities too but for my needs a mild load is going to work very well.
Here are some pics.....
Results from RamShot TAC powder, charge load of powder is written on target dot.
25.0 grains gave best results. Would have been even better but pulled that 4th shot a bit left.
and results from H-335 with 24.0 being best potential, might have had some horizontal with wind....
700 bullets ready now all loaded up with the 25.0 TAC load ready for spring ground squirrels!
Good shooting and swage on!
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Thanks BT. I have a very accurate 62 gr H-4895 load for a Hornady FMJ BT at 22.7 gr thats going about 2600 fps, but Im about to switch to CFE223 because it meters better. I don't expect the data to just transfer to the lr converts, but it's a decent place to get started.
I need one of these so bad... some day Ill be able to afford it. Being a security guard while having a degree in economics is killing me. I need to find a good job.
The upgrade to the 11 cavity mold was worth it!!! 15#s cored in one sitting. No problems. LOVE IT!
Sent from my iPhone using Tapatalk
Excellent!
Swage on!
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Wow, these look great! Any chance for a core swage die in the new BTSimple line? Is it possible to purchase the package without the core mold, and possibly add a core swage die?
Brian do you just sell the lube, I got my Btsimple kit but didn't have the lube, how much for 2 of them shipped to 59901
Thanks
Brain sent a PM To you. would like to see is you have a set ready or if they need to be made. I interested in ordering a set
sorry to ask, but does anyone know how to contact Brian. I have tried calling, emailing, pm, and Facebooking hI'm. Amy help I would appreciate it
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |