From Post #5 on this thread:
"My Barrel started life as a "Lothar Walther .25ACP/6.35 browning Cr-Mo Alloy Steel Pistol Barrel blank" of about 1:9.4 to 1:9.8 twist, 6 groove, .243" bore/.250"groove diameters and roughly 1.1 inch diameter by 23.4" length.
It was Turned, fitted, and finish set up by Willie Clark of "American Gun Works"(AGW), Glendale California.
The Bluing was done by an outside shop contracted by AGW. they sent my barrel out as part of a Lot of items so the Price for the bluing was very reasonable.
Willie tapered the Blank to take Ruger unloading rod and housing and the Ruger front sight from the Original barrel tha tcame on the Used Ruger New Model Convertible Single Six Revolver I bought as a 'donor' from AGW (a consignment sale from a Glendale LEO I was told)."
Lothar Walther Precision tools, Inc. Web site:
http://www.lothar-walther.com/310.php
Their Address and contact info from the web site:
Lothar Walther Precision Tools, Inc.
3425 Hutchinson Rd. - Cumming, GA 30040 Phone: 770-889-9998
Fax: 770-889-4919
E-Mail: lotharwalther@mindspring.com
Internet: www.lothar-walther.com
Look in "Pistol Barrel Products, Barrel Blanks, then either
- Chrome-Moly Steel
- Chrome-Moly Steel (Polygon Profile)
- Stainless Steel
- Stainless Steel (Polygon Profile)
As is your Preference.
I chose "Chrome-Moly Steel" as I wanted a blued barrel to match the Frame. It also seems to be of Lower Price than the Stainless Steel Barrel Blanks.
The first entry in the 'Cr-Mo' Blanks list is the 6.35mm/.25ACP one I bought.
Best Regards,
Chev. William