Snyders JerkyRepackboxInline FabricationLee Precision
WidenersMidSouth Shooters SupplyReloading EverythingRotoMetals2
Load Data Titan Reloading
Results 1 to 6 of 6

Thread: NOE 360-154-WFN for heavy 9mm?

  1. #1
    Boolit Master
    Join Date
    Aug 2005
    Location
    Wenatchee, Washington
    Posts
    540

    NOE 360-154-WFN for heavy 9mm?

    Has anyone tried this? If someone could donate a few bullets (10 or so) for the cause, I'll see if they will allow feeding and report back. My platform is the Sig P320 and P250. Thanks gents!

    Kevin
    History will record, with the greatest astonishment, that those who had the most to lose, did the least to prevent its happening.

    The problem with Liberals is not that they're ignorant, it's just that they know so much that isn't so.

    - Ronald Reagan

  2. #2
    Boolit Grand Master tazman's Avatar
    Join Date
    Jan 2014
    Location
    west central Illinois
    Posts
    7,705
    If you are looking for a heavy boolit for 9mm, try looking at the NOE 358-155-TC (elco). It works as both a flat point or hollow point and several people on this site use them.
    Check this thread for more information.
    http://castboolits.gunloads.com/show...539-Elco-tc-hp

  3. #3
    Boolit Master
    Join Date
    Aug 2005
    Location
    Wenatchee, Washington
    Posts
    540
    Was looking at that too, but I'd like a bigger meplat. I guess once I have a few samples in hand, I can see if they'll feed from a mag or not. Thanks for the reply, tazman
    History will record, with the greatest astonishment, that those who had the most to lose, did the least to prevent its happening.

    The problem with Liberals is not that they're ignorant, it's just that they know so much that isn't so.

    - Ronald Reagan

  4. #4
    Boolit Bub
    Join Date
    Aug 2014
    Posts
    73
    I've got some cast out of range scrap plus 2% tin lubed with CR. Is that conducive to your experiment?

  5. #5
    Boolit Buddy GWM's Avatar
    Join Date
    Aug 2015
    Posts
    194
    The NOE 360-154-WFN didn't do well at all in any of my autoloaders. The nose is long and the meplat is large. It is more at home in the .38 Special. Haven't tried it in your guns though.
    The Lyman 358311 worked better for me. And the Accurate 36-155D has done well in my guns for heavy 9mm. Also the NOE 358-155-TC looks interesting as tazman suggested.
    In the land of the blind, the one eyed man is king.
    In the land of the disarmed, the one armed man is king.
    ________________________________________________
    I like classic Roundnose and Spitzer boolits. So do my guns.

  6. #6
    Boolit Buddy GWM's Avatar
    Join Date
    Aug 2015
    Posts
    194
    Sorry, I didn't know that you were looking for a large meplat.
    In the land of the blind, the one eyed man is king.
    In the land of the disarmed, the one armed man is king.
    ________________________________________________
    I like classic Roundnose and Spitzer boolits. So do my guns.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check