Anyone using Accurate molds for 375 Ruger Looking on light side

[bearcove]

250 gr ballpark loaded for deer 2000fps or less

[longranger]

I have one of their molds for the 375 Winchester .379 250 GC that shoots very well with IMR3031 case capacity is sort of close.

[Bull Shoals]

Don't have the Ruger but have a 375 H & H Win model 70. Loading 375449 Lyman cast of straight linotype sized .377 over 33 gr of AA5744 for 1805 FPS. Loading 31 gr 4759 I get 1824 FPS.

[bearcove]

Thats sorta what I'm gonna do. Have to check on the length of the neck to see how much will be in the case. Want base at bottom of neck. Will do a chamber cast when I get some brass then I can figure out if it is long throated or ...

375449 is designed for straight wall cart if I remember right. I probably need bore of a bore rider design with 1 lube groove, a GC, 2 strong driving bands, a crimp groove, and a groove dia shoulder that fits my throat. That is why I asked about Accurate Mold use cause there are a bunch in the catalog that look like they were made for a shorter neck.

Thanks for the input.

Rod