very nice , first class !
It is much easier to fool people ,
than to convince them they have been fooled !
If you can read this , thank a teacher ...
If you can read this in English , .. thank a Vet !
"Everyone has a plan, until they get punched in the face!" - Mike Tyson
"Don't let my fears become yours." - Me, talking to my children
That look on your face, when you shift into 6th gear, but it's not there.
Nice Job, but that spinning base would cause me some concern.
Thanks guys, I wanted to use the tail stock but didn't have a live center large enough. I did have the spindle speed higher but the lathe tried to walk across the room so down it went.
I have a senior turret coming my way that is in bad shape ill try to take before and after pics that that one.
Put a board on the base and push a live center into it. It would safer than nothing at all.
Ya gots a lathe. Make an adapter. A dead center with a dab of of grease plugged into the adapter would do for a quick polish. In a pinch I've gotten better results with a dead center at reasonable speeds .
David
Sometimes life taps you on the shoulder and reminds you it's a one way street. Jim Morris
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |