Hello all, brand new member here, first post. I have been casting bullets for my muzzleloader for quite a while out of pure lead. I typically use the 370 grain maxi-ball lube with 50/50 beeswax and olive oil or something close to that pretty basic lube. It works fine for the muzzleloader. Anyway, I have recently cast some 260 grain .430 "Keith Type" SWC bullets for the .44 mag and some .459 405 grain flat nose for the .45-70. I cast them from about 100 lbs of wheel weight that I melted over a couple of days and cast into ingots. We will referr to this as "mystery alloy" Would the same lube that I use on the maxi-ball be appropriate for use in the .44 mag and .45-70 cast out of mystery alloy? If not, any recommendations on something that I could use that I could make at home? I have a never-ending supply of beewax.