OK, is it possible for their to be no absolute way for me to cast and load lee slugs.first off im only loading these for general plinking if i could hit a 12in group at 50yds i would be happy. the load i have been using seams to do that for me. but what im not understanding/confusion is about slugging my barrel.
when i put the wad/slug in the barrel and push it through it takes about 100lb of force to get it through
even a hammer at 1 point. from countless time money research I've got the smallest wad slug combo.
fed 12s3 wad
fed gold cup hull
lee 1oz slug average widest point thickness .784
32gr hs-6 powder
2 16ga nitro cards
wads come out on average with only 2 petals. my concern is am i at a dangerous pressure level due to what it takes to slug the barrel.
am i just over thinking this whole process