Snyders JerkyReloading EverythingTitan ReloadingMidSouth Shooters Supply
WidenersInline FabricationLee PrecisionRotoMetals2
Load Data Repackbox
Results 1 to 6 of 6

Thread: lc- 244 pull down powder

  1. #1
    Boolit Master TES's Avatar
    Join Date
    Feb 2013
    Posts
    535

    lc- 244 pull down powder

    Anyone have any experience with this stuff....or load data?
    They call it "common sense". Why is it so uncommon?

  2. #2
    Boolit Master
    Join Date
    Aug 2011
    Location
    no va
    Posts
    897
    Is that a rifle or pistol powder any ideA?

  3. #3
    Boolit Master TES's Avatar
    Join Date
    Feb 2013
    Posts
    535
    Pistol
    They call it "common sense". Why is it so uncommon?

  4. #4
    Banned

    Join Date
    Dec 2007
    Location
    soda springs Id.
    Posts
    28,088
    if you come up with nothing else.
    you can determine some loads for it by determining the burn rate of the powder by doing a direct comparison with known powders.
    i.e a 3 gr load of bulls-eye and 3 grs of this powder, shoot them over a chronograph.
    if they are close then your done.
    if not move to something like green-dot and try again.
    then unique
    then 800-x then blue-dot then 2400 then h-110.
    unless you see signs that the powder is super slow by the second-third try.
    then move things along some by skipping down the ladder a step or two.

  5. #5
    Boolit Master

    TCLouis's Avatar
    Join Date
    Mar 2005
    Location
    Middle TN
    Posts
    4,404
    Soure?

    Old?

    New?

    Ball?

    Flake?

    Any information with it at all?

    Does anyone remember the designation for that blank powder that out there 3-4 years ago?
    Last edited by TCLouis; 10-02-2014 at 10:38 PM.
    Amendments
    The Second there to protect the First!

  6. #6
    Boolit Master TES's Avatar
    Join Date
    Feb 2013
    Posts
    535
    I think lc stands for Lake city

    But that is all the guy would or could tell me about it at the show.
    They call it "common sense". Why is it so uncommon?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check