I asked this question in the CB favorite loads section, but I'll ask again here to get more coverage...
What's your favorite loads, both full and mid-power, for the 41 mag?
Hopefully, there will be something using Unique and a 210 Magma swc...![]()
I asked this question in the CB favorite loads section, but I'll ask again here to get more coverage...
What's your favorite loads, both full and mid-power, for the 41 mag?
Hopefully, there will be something using Unique and a 210 Magma swc...![]()
wow you must have ESP i was just going to post the same question
hope you dont mind
lee 195 gr and rcbs 210
Last edited by LUCKYDAWG13; 06-08-2014 at 02:54 PM.
kids that hunt and fish dont mug old ladies
Unique pushing a lyman 410459 9.2 grains mild recoil. Took a nice doe last winter at about 40yards.
J
Retired Smsgt IL ANG 183 FW
6.5 reddot? That's a good idea for a plinkin' load! How's the accuracy?
LBT 240 gr. WFN GC and Accurate 41-240K, both at 1100 fps with mil surp M9 powder.
6.5gr of 231 with anything from 210-230gr for plinking
255gr LBT WFN GC pushed with near max dose of LilGun/296/2400/#9 for hunting
But I've used tons of boolits and powder in the 41 from 170-265gr
In the past I shot a sierra 170 JHC ahead of 24 grains of ww296. It shot very flat and would still whop a ram @ 200 with plenty of force. This load will function nice in a desert eagle also. My next challenge is using PC with the 215 Keith in the same gun. They're already cast, coated, and sized. Just got to get some time to load them and shoot some video for you all.
Ebner
Groo here
We found a 215gr swc with 6 gr Trail Boss to be an east shooting accurate load .. [full crimp and win primers]
For decades, I loaded 8 grains of Unique under either a commercial 215 grn. swc, or my Lyman 410459 boolits.
After getting my Uberti 45 Colt, I switched to Alliant Herco. I load 9 grains in both, the .41, and the 45 colt with a 250-260 grain
boolits.
In the .41, the load is my plinker/practice load. In the Uberti 45 Colt, it is my max for this gun.
Years ago, I took two deer, 50-60 yards with the 8 grain load of Unique and the 410459 boolit. Both shots total penetration.
For heavy loads, I really like H110. Seems the heavier the boolits, the better it performs.
I have just started shooting the Ranch Dog gc RF boolit. It drops about 260 grains. It shoots accurate (so far) and hits like a freight train.
Regards
Jack
Last edited by littlejack; 06-09-2014 at 11:13 AM.
I'm with the rest with a Unique load (8.5 grains) and the 410459 bullet. It's the only mold I have in .41 and I see no reason to get another one. This load gets 1150 fps in my 7.5" redhawk, 7.5g makes 1050 fps, with about the same accuracy but more drop.
10 grains of 800X gets 1150 like the unique load does, but the standard deviation is more than double that of the unique.
As for primers, I use whatever I can get, it's not a picky load.
Sorry I don't have a full power load as I have never needed one.
Still working on some, but when I find out which ones I like over the others I will post it up for you.
I just started playing with the cast in my 41, so far it has liked almost everything I loaded light. I have found that AA-5, Unique, 2400 all work well, but it didn't like it when I stepped it up a bit with some AA-9. I knew it going into it though but had to try and see anyway. Simply more push than that alloy wanted is all. Now I got that hopefully under control now just need time to go play.
Later,
Mike / TX
JonB, fine looking grips! I don't have a .41 but my friend does and in fact the BH is in my basement but I don't have dies.
He will be very interested in all your posts.
while you may or may get a load specific to your desire in general - loads for 210-230gr will give you what you want
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |