After handloading for over 20 years I finally broke down and bought a universal decapper from Lee. It arrived today and, like any kid in a candy store, I had to play. 50 7mm Rem Mags, about the same number of .223 mixed, some .375s and I'm smilin' and singin' and lovin' this. Then, you guessed it, the other shoe dropped. My brother sent me a batch of "once fired" .308s he picked up somewhere and I thought now was a good time. The brass was mixed, but I figured I'd sort it after it was capped. About 30 pieces in the capping pin broke on a stubborn FC primer. Didn't look like a crimped military round, but it pushed the rod up through the die. When I went to reset the rod I had a beautiful letter "U". Ahhh well, replacement are only $2.00, but.... Anyone had a similar experience? Something I screwed up? The die was adjusted to just touch shell holder and the caper was set the same as my regular sizing dies - just long enough to knock the primer out. Ever wonder if you were born stoopid, or just took pills for it?