Interesting design contained in what looks to be an ordinary plastic field wad.
http://www.armamentresearch.com/armo...ts-in-ukraine/
Interesting design contained in what looks to be an ordinary plastic field wad.
http://www.armamentresearch.com/armo...ts-in-ukraine/
A really harsh method of 'crowd control'.
Feedback link
http://castboolits.gunloads.com/show...ght=AlaskanGuy
Is it just me, or does the wad inside the loaded round look completely different from the one shown on the right of the photo? For one thing, it seems to be pink; plus, the overpowder cup is quite solid. Looks nothing like the B&P wad shown.
I'll bet you could make something like this out of lead, especially a harder alloy; still wouldn't be anywhere near as hard or strong as brass, though. It could be interesting to cast it as a solid, then bore out a center hole, and put a round-head or hex-head steel screw/bolt into the top of the center hole as a hardened penetrator---wouldn't even be too difficult to harden the screw head with simple tools (propane torch and a bucket of water.) DIY armor-piercing round!
I was thinking that it might be a good flier, but i could care less about armor piercing effect.... I was just thinking that the weight foreward of a slug with this design might fly straight in a smooth bore... I dont want a screw in the center... Just looking for a straight flight...
Feedback link
http://castboolits.gunloads.com/show...ght=AlaskanGuy
It does look like it would fly well---reminds me of a mini version of those Latvian Dupleks steel slugs. A solid lead version would also cast pretty quickly without a core pin; Lee could make a 6 cavity mold...
I think that the slug would tumble very quickly, balance on that slug is poor. *** end is 1/5 of the front end. It would tumble from top to bottom an d cut a hole that looks like a key hole in a human, if you hit anything. That slug looks like a door breaching slug to me.
The Dupleks have an attached wad to help with the shuttlecock effect but do look similar.
This design is quite old and shows up in the Gunwriters web article by Peter Kekkonen:
http://guns.connect.fi/gow/historia4.html
James Gates of Dixie Slugs was also looking at a similar design before he went with the IXL-DGS slug:
http://www.dixieslugs.com/products.html
scroll to the bottom ~ it has an attached wad rather than just the stem and bottom flange/skirt... whatever.
Not sure how these things would fly but I have to think okay because someone put some time into design and drawing.
Longbow
my 8 gauge industrial kiln tool has both zinc and steel slugs
For crowd control and "home" defense nothing really beats the old "buck-n-ball" load out of a smoothie. Thousands of "war of northern aggression" casualties attest to it's effectiveness. 10
10 gauge: as per Robert Ruark, "use enough gun"
MOLON LABE
"I have a list, and am prepared for widespread civil disorder!" 10 ga
Kinda reminds me of an Breneke (sp?) slugs.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |