Is it just my poor vision or are the front two crimping grooves and bands missing from this mould?
http://cgi.ebay.com/ws/eBayISAPI.dll...m=331175543575
Is it just my poor vision or are the front two crimping grooves and bands missing from this mould?
http://cgi.ebay.com/ws/eBayISAPI.dll...m=331175543575
looks like they are there is you click on the 2nd pic and use the zoom in
It kind of looks like an optical illusion with the vent lines where they are. You can see the crimp grooves inside the cavity.
The crimp grooves should be more visible than what`s in the pic , either 1 or 2 , looks as if there might be a little left of the front crimp groove ,but I mean a little!
Shore would lovetoseeit in the hand though , maybe ask the seller to e-mail different pics , at different angles ???
I think I`d pass.
OK went & looked again , & ya see the loobe groove on the edges but not the crimp grooves, someone has removed em .
Even dug mine out & looked at it ,mine has crimp grooves.
GP100man
someone took them out.
it looks like whomever done it also made the hollow-point pin hole with a hatchet.
I was gonna say - That's one ROUGH looking cavity and hollow point pin shaft. Somebody fooled around with this one. Mike
Politicians are a lot like diapers. They should be changed frequently, and for the same reason. Benjamin Franklin
The crazy thing is it will sell for more than an NOE RG2.
[The Montana Gianni] Front sight and squeeze
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |