Just finished casting these from straight WW with lee molds and a lee 20lb pot, I got about 100 230gr TC and 50 or so 230gr LRN, both .452. I can now say I'm officially addicted to this, quite a few of them came out frosty, and 6 or 7 without a filled shoulder but otherwise I'm really happy.
now I just need MORE LEAD!! and a powder coating setup would be great too.
Wow... Very very nice job... Wayyyyyyyyyyy better then my first cast session...
You should have no trouble feeding your new addiction around here... Thought I saw somebody selling 65lb boxes of range lead this very evening... Better jump on it...
Welcome to the addiction...
AG
Feedback link
http://castboolits.gunloads.com/show...ght=AlaskanGuy
Just got 5 jugs of powder coat today. Just waiting for my moulds to come in and I'll be busy like you! Great looking boolits tho! Keep up the good work, and good luck in the search for more lead.
Using Tapatalk
Congratulations, beginners luck strikes again! Let's see a repeat of the success.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
Thanks everyone, I plan to go cast a few more today. I only have 30 lbs or so left, WW are pretty tough to find around here.
Nice job!! I havent tried casting with my new Lee molds yet and hope they cast like that..... All my others are either NOE or Accurate, All I have done since I got the Lee's is clean them real good with soap, water and a toothbrush just like every other mold I got.
Doc
Add a little Ajax or any other cleanser to the soap and scrub well. use the tooth brush while rinsing to get it all off. I tried this method about a month ago and it works better than any thing I have tried. Be sure to pre-heat the mold. My first batch of boolits (1500) with a new 125 gr. 6 cav. Lee 357/38 mold, I had no rejects. A few of them had nothing more than a few slight wrinkles but all of them were shootable.Originally Posted by The Real Doc Holliday
Todays batch is done, 340 in total and they all turned out better than the first. turned the temp down and had very few frosty ones.
Good looking second batch, keep up the good work.
Now you need to powder coat those badboys!
bangerjim
Welcome to Castboolits! That's a really nice start you have. Congratulations.
David
Sometimes life taps you on the shoulder and reminds you it's a one way street. Jim Morris
Thanks, and a powder coating setup in on the top of my list, if I can convince myself I don't need more molds!
They look real good and a little frosty wont hurt anything.
New molds? I bet ya will!!!
Maker of Silver Boolits for Werewolf hunting
Dont need more molds??? Blasphemy!!!
Looking good! Keep up the good work and keep some notes, they really do help.
Great job for your first attempt! It only gets better from here!
Really. don't need more molds!
You need at least 2 molds for every caliber you shoot.... so you know which is more accurate...
You better watch where you go and remember where you beenThat's the way I see it I'm a Simple Man. - Charlie DanielsFor if you forgive other people when they sin against you, your heavenly Father will also forgive you. But if you do not forgive others their sins, your Father will not forgive your sins. -Matthew 6:14-15
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote