WidenersRotoMetals2MidSouth Shooters SupplyLee Precision
RepackboxInline FabricationSnyders JerkyLoad Data
Titan Reloading
Results 1 to 7 of 7

Thread: OK picked up a Lyman 311277 mold cant find any info?

  1. #1
    Boolit Mold
    Join Date
    Dec 2013
    Posts
    15

    OK picked up a Lyman 311277 mold cant find any info?

    Any one know what this was designed for?

    Andy

  2. #2
    Boolit Grand Master


    Larry Gibson's Avatar
    Join Date
    Jul 2005
    Location
    Lake Havasu City, Arizona
    Posts
    21,389
    The 311277 casts a nice little 90 gr RN bullet. I've used it in 30 Luger, 30 Mauser/Tokarev, 32 S&W & S&WL, 32 H&R and in the 30 Carbine in handguns. In rifles it makes an excellent plinking & smal game bullet in just about any .30 cal cartridge. I load it over 2.7 - 3.2 gr Bullseye.

    Larry Gibson

  3. #3
    Boolit Mold
    Join Date
    Dec 2013
    Posts
    15
    Not think I have the same thing this is a plain base bullet about 180-200 gr. by the looks of the mold.

  4. #4
    Boolit Grand Master


    Larry Gibson's Avatar
    Join Date
    Jul 2005
    Location
    Lake Havasu City, Arizona
    Posts
    21,389
    My bad; was refering to the 311227............can't help on the 311277.

    Larry Gibson

  5. #5
    Boolit Master
    Bent Ramrod's Avatar
    Join Date
    Apr 2005
    Location
    Southern Arizona
    Posts
    4,304
    From the first Lyman Cast Bullet Handbook:

    311277

    Another early German design bullet (refer to 311256), nose diameter .300, 1st band .317 dia, base .308 dia.

    Apparently at one time there was a school of thought that smokeless powders required a sealing band just ahead of the case mouth. It's sort of like a German "stop-ring" design except those had the ring so the reloader wouldn't have to resize the case necks to keep the boolit from falling inside.

  6. #6
    Boolit Mold
    Join Date
    Dec 2013
    Posts
    15
    Thanks, might be of limited use for me....

  7. #7
    Boolit Master
    Join Date
    Sep 2008
    Location
    NY/VT Border
    Posts
    527
    My 1935 handbook lists it as "197 grs, .30 Gov't. '06"

    There is a number of heavy 30 caliber bullets that were designed in that number sequence, most by Dr. Hudson. These were trial and error type designs at a time when they were trying to find a good 30 caliber bullet suitable for practice in the 30-40 and early '06 years. Back then they didn't give the guys crates of ammo for practice. Hudson finally invented the gas check with 311284, which was sorta the crowning achievement of all the work put into finding a way to make your own full power .30 loads without what he called "fusion of the base" With the help of UMC producing the gas checks and John Barlow of Ideal making the molds, 311284 was the result. I would venture to guess that your mold, 311277, wasn't one that produced the best results and therefore has little mention, even in my catalogs of 1903 and 1910.
    Need advice fixing a coleman appliance? Maybe I can help!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check