Anyone have a recipe for this bullet using Winchester 231 ? Or would that be a good powder to use?
Thanks guys.
Anyone have a recipe for this bullet using Winchester 231 ? Or would that be a good powder to use?
Thanks guys.
“People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf” — George Orwell
I have never tried 231, but 4.2g of Bullseye or 5g of Unique have worked well for me.
NRA Benefactor Member NRA Golden Eagle
5.0 to 5.5 of 231/HP-38 should get you in the 1200fps+ range.
A most interesting bullet in the 9mm...I used 3.5~4.0 of Promo in my Taurus 99AF... Sure makes a frugal use of lead alloy. Wonderful for plinking.
Would a 1.010 be suffevient o a l for that 102 gr lead cast load
“People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf” — George Orwell
I had great results with this mold for 9mm. Not at home right now, but I got all the info I needed for powder and OAL from the Lyman fourth editio Cast Bullet Handbook.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |