Lets put it this way. I bought my first Lee Classic whackem loader with dipper back in the early 1960s. That is 50 years ago, I checked that aluminum dipper few months ago, it was still throwing the same 40 grain charge.
If the Lee Dippers were not safe and accurate, I doubt they would still be made and sold today.
There is no safer way to reload. Static volume and no moving parts.
The Lee collet dies came with a 2.8cc dipper and the included chart says that, with a 150 gr FMJ bullet, use 40 grs of H4895. I started mixing dippers to come up with the 40 grs (2.8cc is right around 38 grs).
Then I found a chart on the Swiss Rifles forum that listed 36.3 grs as a low powder charge, and goes up from there.
So, the 2.8cc dipper that Lee provided with the dies is less than their suggested 40 grs but still safe.
150 Hornady GMX, IB, SST, SP, BTSP, RN, BT-FMJ, H-4895 36.3 2,300
150 Hornady GMX, IB, SST, SP, BTSP, RN, BT-FMJ, H-4895 38.4 2,400
maximum load H-4895 44.6 2,700
Micah 6:8
He hath shewed thee, O man, what is good; and what doth the LORD require of thee, but to do justly, and to love mercy, and to walk humbly with thy God?
"I don't have hobbies - I'm developing a robust post-apocalyptic skill set"
I may be discharged and retired but I'm sure I did not renounce the oath that I solemnly swore!
I'll second Hoffmanite's suggestion of using spherical powder for better consistency. I've used lee dippers a lot in the past and still do some today. A friend wanted to load 30-06 and that was all. Set up with a safe load of winchester 748 and he's still loading with a dipper and hand press 20 years later. As I recall, no matter how that powder was dipped, as long as it was carded flat we were within .3 grain. I also loaded a lot of H110 with them. The charge tables really arent very accurate though. Maybe a friend will let you borrow a scale for a bit.
"Is all this REALLY necessary?"
I got a digital scale and I've been checking the loads that the dippers actually scoop, and like you said, each scoop is pretty close to the others.
For me, the dippers are accurate enough if you use a practiced repetitive technique. If you are anal or need more precision use a powder tickler as suggested.
Hello, I have a set of red dippers that aren't marked in cc's but have a number i.e 020, 039, 052 ect,,ect.
Which came first the Yellow ones or the Red ones?.
happy new year,,,
I've used Lee dippers for years and while I have had a scale for many years, it is quicker and easier to use dippers for plinking loads (mostly what I shoot). Some may agree and some may not but I have to say that Lee wouldn't be making and selling dipper kits if they didn't sell.
I do check the dippers using a scale to make sure they are throwing the correct charge. I can't recall how much variation I find but I will say up to a couple of grains. Some powders change considerably in density. I have some SR4756 that throws a significantly heavier charge than the Lee chart indicates.
So, use the Lee dippers but check with a scale if and when you get one and don't play to close to max. loads because both powder and technique may cause charge variations. Lighter is okay but heavier may not be.
Happy New Year by the way!
Longbow
Is .3 grain going to matter to you shooting the gong at 100 no Your dipping looks just fine your not at max load or dealing with a tiny capacity pistol case there are a lot of other factors that will matter more than .3 grains of powder including just how accurate and repeatable your scale is Go out and give that gong a pounding
I scoop and tap sideways. I weighed all the powders I use so there's no worry. Don't use my numbers using your method of scooping.
This digital scale weighs to the 1/100th of a grain. More precise than most. But it pegs out at 350 grs. Got this straight from China for less than $20. Been happy with it.
I used to be fairly anal about weighing each charge. One day while testing some loads in my 338 win mag that had a 3 grain variation, 5 shots per load on each target. All shot well, just under moa. While looking at the targets later I noticed they all landed in the same spot in relation to the aim point.
I could have taken one cartridge from each loading with 3 gr of H4350 variation between them and still shot a group at moa or less. I've never worried about slight differences in powder since.
If I was loading at max then I certainly would be careful.
Also three grains difference in a 338 mag does not equal 3 grs in say a 30-30
If I wondered I'd deliberately load some loads with twice the variation that I got from my metering system and go shoot a group with them. This will affect some guns more than others. Woody
Some people live and learn but I mostly just live
are we to assume this is a k31 and not an 1889
hey, watch where ya point that thing!
It's a Schmidt Rubin 96/11.
I love lee dippers put in pan than trickle the rest for my varmint loads.just dip and check often for pistol.rember all muzzleloaders since way back use volume to load (i know black and smokeless use different ways to measure but look how many years they worked)
The so called light charges the LEE dipper throws are by no means weak charges.
They are a touch light for safety, but I can assure you they are killers and will shoot thru anything you hit with them.
I have used dippers for years and made my own using a scale to weigh the charge produced.
Technique will cause variation, ie... swiping fresh "dip" with business card Will result in lower charge weight.. "heaping" will result in slightly heavier charge... One Shake, or Bump??? two???? use your Scale to get yer technique.. Use whatever is Repeatable, for You
decades ago Wiley Clapp wrote about this in Gun World magazine - his method gave very consistent + accurate charges - he filled a cup with powder, inserted dipper to bottom + scoop up with dipper over full, + than use a business card to strike of excess powder - been doing that way for more years than i can remember with no problems at all - i utilize both the red + yellow ones for most of my loading -
never pick a fight with an old man - if he is too old to fight he will just kill you -
in this current crisis our government is not the solution , it is the problem ! -
ILLEGITIMI NON CARBORUNDUM
as they say in latin
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |