WidenersLee PrecisionInline FabricationReloading Everything
Snyders JerkyLoad DataRotoMetals2MidSouth Shooters Supply
Repackbox Titan Reloading
Results 1 to 2 of 2

Thread: 7.7 Arisaka

  1. 11-09-2013, 03:47 PM #1
    psj12
    psj12 is offline
    Boolit Mold
    Join Date
    Jan 2009
    Posts
    20

    7.7 Arisaka

    Does anyone have a good cast load for a 7.7 type 99 Arisaka? I presently shoot Hornandy .312 spire point J bullets with great accuracy. I have an old lyman book that lists some very low power cast loads. Additionally I will probably need a mold that casts .312" or slightly larger. I have loaded it to lower velocity with .311 cast bullets with 308 gas checks with some success.
    Reply With Quote Reply With Quote
  2. 11-09-2013, 07:48 PM #2
    leadhead
    leadhead is offline
    Boolit Master

    leadhead's Avatar
    Join Date
    May 2006
    Location
    Western Pa.
    Posts
    984
    I use the Lyman 314299 mold sized to .314 and 16.5 grains of 2400.
    Can ring a 10" steel gong at 200 yds all day long off the bench.
    Denny
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check