Load DataSnyders JerkyLee PrecisionMidSouth Shooters Supply
RepackboxRotoMetals2Inline FabricationWideners
Titan Reloading
Results 1 to 7 of 7

Thread: First rifle. First NEW rifle........

  1. #1
    Boolit Master



    Join Date
    Dec 2012
    Location
    Warren Co., Va.
    Posts
    1,583

    First rifle. First NEW rifle........

    Not quite done, but, it's shootable. My first brand new rifle. Dennis at SubSonic was the vendor for upper and lower AR receivers, as well as a barrel. Noah at Extreme Tactical (think I got that right) provided me with the other bits and pieces that I needed. And I got a funky fake suppressor off fleabay. Looks tacky, but, I actually like the weight it gives the piece. Feels more balanced. Still have to get a forestock, but, I can live without one. I plan to carve up an old walnut blank that been on the porch for 10 - 12 years, and have me a thumb-hole stock. Then I'll figure out how to make the forestock. So, I now have a functional firearm. About 100 loaded rounds. Now I need a warm, dry day so I can get to the range. Can only shoot J-words presently. Gotta make sizing dies. AND, I wanna try to paper patch these. It may prove to be an exercise in futility, but, I'm gonna try. With my new rifle, in the picture is my first rifle, bought with my own money, circa 1975. It looks like it did the day I got it. A 1909 Argentine Mauser. It has always shoot better than I could. It still does. A good, honest rifle. And still my favorite. Thanks, Dennis and Noah!!


    Click image for larger version. 

Name:	AR2A.jpg 
Views:	33 
Size:	62.1 KB 
ID:	83966
    Last edited by mikeym1a; 10-12-2013 at 11:11 AM. Reason: correct name

  2. #2
    Boolit Master



    Join Date
    Dec 2012
    Location
    Warren Co., Va.
    Posts
    1,583
    That photo didn't look so dark when I had it up on the photo manipulator. So, here is one that has been lightened up.

    Click image for larger version. 

Name:	AR2A1.jpg 
Views:	21 
Size:	72.3 KB 
ID:	83967

  3. #3
    Boolit Master Jack Stanley's Avatar
    Join Date
    Mar 2006
    Location
    South of the north pole in the land of the falling waters
    Posts
    4,081
    A day at the range is supposed to be warm ??? dry ???? Not so much this year , but hey , just happy to get out regardless of the weather .

    Neat looking old rifle ya got there , the black rifle should be interesting when finished .

    Jack

  4. #4
    Boolit Bub
    Join Date
    Apr 2013
    Location
    Bluffton, SC
    Posts
    52
    Nice mauser, and good luck with the at build...they are a lot of fun!

  5. #5
    Boolit Master



    Join Date
    Dec 2012
    Location
    Warren Co., Va.
    Posts
    1,583
    Yeah, I have the urge to shoot it. But, it's still raining. Unfortunately, the range I use is very 'primitive', as are the roads leading to it. I only have a two wheel drive truck, and will probably need to put chains on to get to the actual range. Seriously. The road is so rutted that you need chains, and weight in the back to get up the one section that is about a 30 degree slope. I like it because only the really dedicated go there to shoot. If I get there Mon - Wed, I have it to myself, and any range brass that's left from the weekend! I've accumulated almost 1000 .223 cases that way, 2/3 of them brass boxer cases.

  6. #6
    Boolit Bub
    Join Date
    Apr 2013
    Location
    Bluffton, SC
    Posts
    52
    Quote Originally Posted by mikeym1a View Post
    Yeah, I have the urge to shoot it. But, it's still raining. Unfortunately, the range I use is very 'primitive', as are the roads leading to it. I only have a two wheel drive truck, and will probably need to put chains on to get to the actual range. Seriously. The road is so rutted that you need chains, and weight in the back to get up the one section that is about a 30 degree slope. I like it because only the really dedicated go there to shoot. If I get there Mon - Wed, I have it to myself, and any range brass that's left from the weekend! I've accumulated almost 1000 .223 cases that way, 2/3 of them brass boxer cases.
    Sounds like you got it figured out I like to do the same but its a 45 minute drive to the range, and lately people are getting wise to farming the trash for the brass...

  7. #7
    Boolit Master



    Join Date
    Dec 2012
    Location
    Warren Co., Va.
    Posts
    1,583
    The rifle is ready. Got a 30 rd mag. Have 200rds loaded, two different powders. I have the urge. But I have this water line to fix. It finally finished raining, so i can see where the leak is! Now for the 'fun' part of digging it up, and replacing the broken parts. Shooting will have to wait til next week. Besides, with all the rain last weekend, there probably isn't too much brass laying around. Maybe next Monday......

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check