TC, Wouldnt think so. I check mine yesterday with new temp gage, gonna check again. Temp was low yesterday and still no leading. First day i've every had temp gage. I been shootin hitek before i started this 1024# sticky. You'll figure it out. Try to get convection oven at kmart, where i got mine, then it goes on sale. uh-huh! Gotta cook outside, i always will! I have cooked 1 tray in garage, but you hav to leave and then open door. My garage is a/c-heat, so dont want door open. Might buy 500 bullets for round 27$ from john, run a test on that. Your tray is wire?,, so air can circulate thru TC.?? I would use acetone. I dont know, just throwin stuff out. A paycheck or two, iam gonna get some 9mm from john. Link above,on last pg.. Ausglock told me first of thread, let first coat dry 30 mins.. Preheat oven and do sompin else,, my iphone timer tells me when stuffs ready.
Ya I plan on getting a convection but would like to make sure it's going to work first, I think the upside to the convection is it will be more even and take less time yielding lighter colored bullets.
Yup my tray is made from 1/8 hardware cloth just like the Bayou bullets directions said to use. I'm very happy with the basket don't think I could improve on it much.
Huh?I would use acetone
I've thought about buying bullets but of all the lead I've ever shot none has been bought so far and WW+lube seems to be a proven winner for me tho I pan lube and it just takes so long.
Been Letting the 1st coat air dry for atleast a hour and I always let the oven preheat a minimum of 10mins.
I took the 100ish bullets I have left from this batch and mixed up some coating at a 5-1-5 ratio. Coated and Baked twice so these bullets now have 3 coats at 5-1-10 with about 7mls of coating per layer and 2 coats at 5-1-5 at 4mls per layer. Tho the first coats were for 250ish rounds and the last 2 I only have around 100 so the mls are different.