10mm Hunting Load Needed

[Mike.44]

Mainly deer and hogs.
I am searching for a hunting load. Been doing all sorts of searches for data and will continue to do so. This is what I have:
Glock 20sf with a 6" KKM Bbl, 24lb recoil spring on steel guiderod with buffer. Have it topped with a Vortex Razor 3moa red dot.

Have 200gr WFNGC Double Tap bullets and new Starline brass.

Applicable powders on hand are:
Power Pistol, Blue Dot, Titegroup, 231, 296, VV n340, L'il gun.

Looking for accuracy and power.......accuracy first.

Any help is much appreciated.
Mike

[Sven]

Of the powders listed, I'd start with Power Pistol. You must have the data on it. My favorite heavy load 10mm powder is Longshot, accurate and good velocity. 296 is too slow. Some like Blue Dot -- I have used it in .44 mag years ago. That 10mm should do the job!

[ski2me]

Sven, I am looking for the same info. I have Longshot and 200gr WFNGC Double Tap bullets. I usually use WST with lead but going for a hot load, the pressure would be scary. Have any work up recipes?

[ctious]

With the Choices listed u can get good med hot loads. Nothing nuke. I would have to look back in my notes but blue dot does well. I don't want to say the charge I got to before pressure signs. But I went away from blue dot for hunting because of it being temp sensitive. Pressure climbing in colder temps. But if u keep the load at the med hot level u should be ok. Power pistol can also do good med hot loads. I plan on playing with this powder more.

800x is king for the nuke loads followed up by aa#9 and longshot.

[Mike.44]

Thanks guys. If you have any load recipies please PM them to me. Thanks again.

[harley45]

I have the same basic bullet I'll PM you the load I shot this with.


IMG_0127 by White Tiger Photographic, on Flickr

[Mike.44]

Thanks guys, you all are awesome.

[warboar_21]

I use a max charge of blue dot under a 200gr cast bullet. Gives me 1250fps out of my Kimber.