Yesterday I went to the range and shot some 45-70 PP loads. When I went to write the results in my book I saw what I had loaded and it just did not look right. I have a 400g paper patched slug over 30 grains of 3031. I went back to the lymans manual and it is way under the recommended load (about 15 grains low). the load for 4759 is 30 gr on the low end so I may have crossed them up. Question is, is this dangerous being under the minimum.
The load was actually pretty accurate and not bad on the shoulder either. It did not lack power either as it made it through a 5" oak log with no problem