My LnL AP bullet brass tray on the cheap.

[Muddydogs]

Here is a simple, easy and handy bullet brass tray I built for the front of my AP.







All I used was an L bracket from the hardware store that is used in framing to secure 2 2x4's together. I added an extra 90 degree bend and screwed it to the bench. Don't mind the velcro and cardboard, My press works the grease out on the left side and I was always bumping my leg into it and getting grease on my pants so I made a grease guard.

For the blue bullet bin I cut a some of the channel off the back so it would hang past the 90 degree bend in the L bracket so that both bins would fit without interfering with the press handle. I also had to glue a block of wood to the back of the blue bin so it would rest on the L bracket and keep the bin level. Before the wood the bin hung front down and bullets tended to want to roll out.

[grubbylabs]

Hey that looks pretty good, I might have to look into that.

[bbqncigars]

Great idea! Now I'll have instant use of some of those Akro bins I just ordered from Amazon.

[Brittany]

Are you going to build build one of them for your poor old father who taught you to reload. Dad

[LUBEDUDE]

Good Job!

[cheese1566]

So simple!

I have my loaders stacked next to each other and space is tight!

Looks like I have a project coming!

[Muddydogs]

Are you going to build build one of them for your poor old father who taught you to reload. Dad

Sure I will build one for you. I will drive all the way to Washington, bend the bracket and screw it to the bench. I will even bring the materials and a couple bins. Maybe since I have so far to drive and all this work to do once I get there you will part with some of that lead you have just setting around. Of cource I will be expecting to be feed also. As an added bonus I could bring the kids and there kids for one big family event.

[Brittany]

Every thing is fine,,,,,, Except NO Lead.