Sorry not able to post pics. About 15-20 yrs ago I bought some 200 gr. cast SWC for my Llama .45. Couldn't get them to feed so set them aside. Recently came upon them again and decided to try again. My buddy has slightly polished and slightly increased the radius on the feed ramp on my .45 so I loaded some dummies long and kept reducing the length 'til they would feed by hand. Loaded up a few and viola, they feed. Now I would like to know what mold this was.
The boolit measures .645 in length, bevel based, with one lube groove, base band slightly taller than front band and nose approximately equal in length to full diameter body. I know this is a lame description but, from pictures I could pull up, this looks like a #68 clone. Any help would be appreciated.