Hey fellas. I made a quick video on my paper patching method. I've found it quite easier than expected, so I posted this video.
www.youtube.com/watch?v=lWU6a3FmTJo
-Dane
Hey fellas. I made a quick video on my paper patching method. I've found it quite easier than expected, so I posted this video.
www.youtube.com/watch?v=lWU6a3FmTJo
-Dane
scrap, smelt, cast, lube, load, shoot. repeat.
Well Done. Enjoyed watching and maybe learned something. Thanks
Now that is pretty slick!
Makes it look so easy I might just give it another go. I have used the more traditional patching board style which seems to work well for large diameter boolit but I find it awkward doing .30 cal. Your method looks better suited to small diameters than what I have been doing.
Nice video! Thanks!
Longbow
I noted the patch alignment and short wet exposure time. Neat trick that. I might just (well, I will) give it a go.
Rest In Peace My Son (01/06/1986 - 14/01/2014)
''Assume everything that moves is a human before identifying as otherwise''
Yep, I favorited that video so I can come back to it when I have the rest of my loading setup installed and I'm ready to start patching.
That looks exactly like my method for patching my 45/70 BP loads for my Quigly rifle! Havn't done that in awhile, but watching that brings back some fond memories....cutting hundreds of patches...rolling the patches onto the boolits while watching Mythbusters...
Does the tail get left like that or pressed flat? What is it that you have on the table to do the tail roll/fold?
I've also put it under my favourites.
Might I suggest this post be made a sticky?
Or at least the youtube link be added to an existing sticky?
Rest In Peace My Son (01/06/1986 - 14/01/2014)
''Assume everything that moves is a human before identifying as otherwise''
The tail is twisted while extra water is removed by rolling on a hand towel. It serves three purposes actually. The cushion allows patch to boolit contours to be pressed exactly.
I dry them in front of a fan, which takes no more than an hour.
They are then sized with a thin coat of turtle wax to ensure patch adhesion. Sizing presses the tiny tail to a perfectly flat, compact base.
Using these methods and a few other minor details, I have been able to achieve about 1.5 inch groups at 100 yards. Overall, this paper patching stuff has proven extremely rewarding. I love how one can attain J-word velocities for a fraction of the cost with equal accuracy. Plus, the confetti is just plain cool.
Thank you all for the kind comments.
Sent from my SCH-I535 using Tapatalk 2
scrap, smelt, cast, lube, load, shoot. repeat.
Here's a picture of the final product
I hope the photo isn't too large...
Sent from my SCH-I535 using Tapatalk 2
scrap, smelt, cast, lube, load, shoot. repeat.
That is slicker than cat poop on a linoliam floor. This just added mor to my feeble knolage base to only help me improve.
Never thought about turtle wax, that's interesting. I just wrap em and place them base down in a box for storage, then give em a light coat of Crisco before seating them in the case.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |