Titan ReloadingSnyders JerkyWidenersRotoMetals2
Load DataMidSouth Shooters SupplyLee PrecisionRepackbox
Inline Fabrication
Results 1 to 9 of 9

Thread: 180gr single shot pistol bullet vs Bear?

  1. #1
    Boolit Buddy chickenstripe's Avatar
    Join Date
    Jan 2008
    Location
    Western, Pennsyltuckey
    Posts
    241

    180gr single shot pistol bullet vs Bear?

    I know their not boolits, but I feel that this group of folks can shed some light.....

    I have a concern regarding Hornady's 35cal 180gr single shot pistol bullet.

    http://www.hornady.com/store/35-Cal-...e-Shot-Pistol/

    I acquired several hundred of these, and have them loaded in my 358Win at 2300fps, and have successfully used them to take deer.

    I've learned that this bullet is designed to expand at lower velocities, by having a thinner jacket material.

    Can anyone out there give any information, pro or con, about using this bullet for black bear? Im more concerned about bullet failure and penetration (or lack of), not the power that the combination provides.

  2. #2
    Boolit Buddy TCTex's Avatar
    Join Date
    Oct 2010
    Location
    Texas
    Posts
    353
    I would call Hornady about that! If I am remembering this correctly I have been told by Hornady that they will handle rifle velocities just fine. They put the SSP on there to make the lawyers happy. Something about they didn’t want people loading them up in tubular rifles. (And it was too long to cycle in some platforms.)

    As for black bears, I know quite a few hunters that have successfully taken black bears with the 35 Rem, 358 win, 358 JDJ, and 357 Herrett handguns using the 180 SSP.

    FWIW, I called Hornady and asked questions about my 26in Encore barrel in 357 Herrett. The two bullets in question were the 200gr FTX and the 180 SSP. I can shoot the FTX at 2400fps and the SSP at 2500fps. I was told to back off the FTX a little and that I couldn’t push the SSP to hard… LOL
    Last edited by TCTex; 06-29-2012 at 09:45 AM. Reason: brain fart...
    Democracy is two wolves and a lamb deciding what to have for dinner. Liberty is a well armed lamb contesting the vote

    Benjamin Franklin

  3. #3
    Boolit Master
    Join Date
    Nov 2011
    Location
    Alberta, Canada
    Posts
    505
    I have used this bullet for bear in a 357Maximum. They work great at
    Those velocities.

    I would just pick your shot carefully. If your ranges are short on average I would take only clear broadside shots.

    Goodluck and enjoy your hunting.

  4. #4
    Boolit Master
    429421Cowboy's Avatar
    Join Date
    Apr 2011
    Location
    Montana
    Posts
    1,161
    My personal opinion, having never shot the bullet myself, is that if it performed well on deer and you were happy with it, i would feel comfortable using it on black bear. I think a good shot that is patient can take an average size blackie with a good deer rifle, many hundreds have fallen to .30/30, .243 and .250/3000 rifles with less effective bullets than yours, as long as it can poke a good hole you should be fine.
    Raisin' Black Angus cows, outta gas, outta money, outta tags, low on boolits, but full 'a hope on the Rocky Mountain Eastern Slope!
    Why does a man with a 7mag never panic buy? Because a man with a 7mag has no need to panic!

    "If you ain't shootin', you should be reloadin' if you ain't reloadin' you should be movin', if you ain't movin', somebody's gonna come by and cut your head off and put it on a stick!" Words to fight by, from Clint Smith

  5. #5
    Boolit Buddy chickenstripe's Avatar
    Join Date
    Jan 2008
    Location
    Western, Pennsyltuckey
    Posts
    241
    Thanks for all of the feedback guys.

    I have called hornady in the past about 158gr 357 bullets (HP vs FP), and they can comment on velocity, but not performance on game (other than not to use FMJ on game).

    I'm going to load some barnes 200gr, and the 180gr SSP's (they are similar profile) and do some penetration comparisons, just to satisy my curiosity.

  6. #6
    Boolit Grand Master

    mdi's Avatar
    Join Date
    Jun 2008
    Location
    So. Orygun
    Posts
    7,240
    How did it preform on deer? Shallow rapid expansion? Deep penetration an expansion? Through and through? I would think one would want very deep penetration and moderate expansion for bear.
    My Anchor is holding fast!

  7. #7
    Boolit Master fryboy's Avatar
    Join Date
    Feb 2010
    Location
    3 1/2 miles out past the stix on the 9.9
    Posts
    2,774
    bear are a lil tougher than deer ( more like an overgrown hog with out the thick cranium plate ) as noted the bullet is lighter constructed for lower powered calibers ( where it excels btw ) the 358 win has a lil more ummm ummmph and as noted above the closer you are the better the chance of the bullet failing ( read that blowing up instead of thru ) but as noted a 30-30 will kill a bear , heck a .22 lr will kill deer and elephant ( tho i've not done either ) with proper shot placement ( and IMHO that matters more than massive amounts of energy etc )
    Je suis Charlie

    " To sit in judgment of those things which you perceive to be wrong or imperfect is to be one more person who is part of judgment, evil or imperfection."
    Wayne Dyer
    if it was easy would it be as worthy ? or as long of lasting impression ? the hardest of lessons are the best of teachers [shrugz]
    http://www.youtube.com/watch?v=WLzFhOslZPM

  8. #8
    Boolit Buddy
    Join Date
    Jan 2007
    Location
    Penna.
    Posts
    352
    Where I hunt 100 yards is a long way unless your on a pipeline. Hornady 180 SSP in a 35 Rem Contender carbine has done well. For the .358 Win I use 200 gr. Rem or Hornady.

  9. #9
    Boolit Buddy chickenstripe's Avatar
    Join Date
    Jan 2008
    Location
    Western, Pennsyltuckey
    Posts
    241

    35 caliber J-word testing - Ruger frontier in 358 win

    In an effort to publish some data out there on the internet related to these short barreled rifles, and their terminal performance, I did a bit of testing today.

    The rifle is a ruger frontier / compact in 358 winchester (16.5" barrel).



    I posed a question on this forum about the 180gr SSP bullet from Hornady. For comparison I've included the 200gr Barnes TSX, and 250gr Hornady Interlock.

    Muzzle velocities are only known for the 180gr load (chronograph is down) and they are launched at 2400fps. For this length barrel, that is about as fast as I can get them to go.

    Impact into wet phonebooks was at 50yds.



    Bullets were recovered and the penetration was measured, as was the expanded diameters of the projectiles.

    Left to right: 180gr Hornady SSP #3505, 200gr Barnes TSX-FP #35820, 250gr Hornady Interlock #3525





    In addition to the 200gr barnes being the prettiest recovered bullet, it has the same point of impact at 100yds as the 180gr Hornady. Therefore no sight adjustment is required. Haven't tried the 250grainer at 100yds.

    The 180gr bullet had alot of fragmentation at the point when it was recovered. About the size of #4 shot. Both the 250 and 180 grain bullets peeled back to the cannelure.

    I'll be publishing velocity data within the next few weeks, when I get my hands on a chronograph.

    Hope this helps someone...... I couldn't find any data on bullets fired from these short barreled rifles.

    BTW I'll be using the 200gr barnes......

    Chickenstripe.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check