Bob,
I do have everything in stock and ready to assemble.
The sizing die does nothing more then size the .316 5.7 brass down to .302ish for 30 caliber jacket use. It would also size down "allready formed" 5/16 copper tubing jackets but it will not make the jackets from copper tubing. That requires a sepperate additional die.
My dies will work in any press that accepts shell holder type base punhes or I can supply a threaded addapter for teh wallnut hill press to accept threaded base punches. The wallnut hill ram has a 7/8-14 (standard reloading die) thread correct? The only thing that concerns me is how to attach an automatic ejection system. Actually I know exactly how I would do it just so long as it is not in the way. I would provide a 7/8-14 die that will hold the threaded base punches as well as hold the ejector on. I highly recomend some sort of ejector system to save damage to the small .095 meplat nose of the bullets. I'm sure you could eject them the same way you do with ch dies via hammer or mallet but I don't recomend it.
Cost is as follows.
$475 custom BTSniper 30 cal two die set
$100 sizing die
$25 7/8-14 threaded addapter for use of threaded base punches to work with wallnut hill press
$125 ejector (optional but highly recomended!)
Let me know if you have any questions and I'll be happy to help.
Thanks
Brian