A couple more I picked up lately. H&R 586 10" barrel 5 shot in 32 Mag. The other is a 1914 Mauser Pocket pistol.
A couple more I picked up lately. H&R 586 10" barrel 5 shot in 32 Mag. The other is a 1914 Mauser Pocket pistol.
Today at a local gunshow, I finally found a very nice S&W M30-1. I think it is in excellent condition, and doubt that it's been shot very much. I also picked up some brass and as set of dies. I'm going to start shopping for a mould to cast some semi-wadcutters. While I shop for a mould, I'll try the boolet thread to see if a member will help me out. –Ed
RCBS 32-098. Case closed. Fine wheelgun BTW!
You can miss fast & you can miss a lot, but only hits count.
Lyman 22596,225107,225353,225438,225415,225450,225646, 225462,228367,244203,245496,245497,245498,245499 RCBS 22-55-SP,22-55-FP,243-95-SP,243-100-FP, NEI 100244GC-#14, 55 224 GC-#4,225 45-#3 PB, NOE 22-055 SP,MX2-243,Saeco 221 & 243, RD TLC225-50-RF,Lee 22 Bator 6c & 2c HP. Love casting small boolits, let me know if you have one that I don't that you would part with!
[IMG][/IMG]
My 1907 Savage, 1944 Walther PP, 1957 Beretta and 2 1900 FN Brownings.
Picked up here and there for $50.00 each, except for the nickel Browning which was $100.00.
Inexpensive pistols, but fun and really cheap to shoot with 78gr. round nose bullets and small doses of Bullseye.
Regards, DaveF.
Last edited by DaveF; 10-30-2011 at 03:35 PM.
A nice Model 30 with 4" barrel is on my short list.
This is a 1849 Pocket Colt .31 (close to .32) made in 1861,here in Canada a lot of the .32 cal. guns are prohibited so I will have to make due with this one.
S&W Model 16-4, 4" barrel, .32 Magnum:
S&W Model 1905, 4th Change, .32-20 WCF:
S&W Model 16-4, 6" barrel, .32 Magnum: I also have an extra cylinder in .32-20 WCF, am having one made in .32 S&W Long, and am having the .32 Mag cylinder reamed to .327 Magnum.
S&W Model 16-3, 6" barrel, .32 S&W Long:
Last edited by billsr; 11-01-2011 at 07:29 PM.
Here are my 3. The CZ-70 and Regulation Police I've had for a while. I just got the Army Special in .32-20 last week. No dies for .32-20 yet but I put an expensive box of Ultra-max through it today and it shoots pretty well. I'm going to try it with the same RCBS 32-098 that shoots so well in the S&W.
Colt Army Special .32-20 (Yes, I know the grips are wrong, but I needed something with a frame filling portion and these were handy):
Savage 1907, a very interesting design:
BarryinIN,
How do you like the Savage 1907? I passed on an opportunity to get one a month or so ago. The design has always interested me as the Savage 1907 in .45ACP almost beat out the 1911 in the military trials.
I like it, but it's more for how it's fun to study and neat to look at than for it being better than anything. It's a very interesting and different design, but interesting and different doesn't always mean good.
It actually shot well for what it is, but the trigger took all my concentration to get it. It has a goofy trigger linkage.
For more detail, I wrote this about it:
http://www.practicallyshooting.com/s...urious-indeed/
BarryinIN,
That's a great write-up with great pictures. Thanks for the link, the good read, and the information!
Thank you, sir!
I didn't mean to be rude by saying "read this", but I think you can see why that was easier than trying to summarize what I thought of it.
The thing that still gets me about this gun is the recoil. It's not like it's a wrist twister, but a steel .32 ACP as big as the Kahr 9mm in my pocket should hardly twitch when fired. It is pretty stiff. It's like it has a built-in recoil amplifier. I always read the Savage .45 ACP was a hard kicker, and I believe it now.
Last edited by BarryinIN; 11-21-2011 at 07:33 PM.
Of topic addendum here Barry. I have a 1917 in .380 and while it doesn't have a target trigger it's nowhere near as bad as what you described. Mine will shoot into 3-4" at 25 yards and I shot a perfect 250 on the AZ POST qual course with it a couple years ago. I used a cell phone case for a mag pouch
Hmmm, I'll try to look at another one sometime then. Mine has the heaviest SA trigger I've ever felt. It is a strange mix, actually. The travel isn't very long at all, which should be nice, but the weight causes you to feel every imperfection along the way and I'd almost swear it manages to stack a little in that short distance. Or maybe it's just that my finger gets tired, so it feels like it increases.
It's too bad, because I can tell the accuracy is there. It's just hard to get it.
I can believe it could ace a qual with even a halfway decent trigger.
On a side note: I've only had maybe three .32ACP pistols, and they were all pretty accurate in spite of shortcomings like triggers or small overall size. I've heard the .32ACP is one of those so-called "inherently accurate" cartridges, and my tiny experience seems to fit.
Maybe someday when I make a few billion and have lots of time both, I'll make up a .32 ACP target gun for testing. Maybe a .32ACP XP-100....
...Off topic alert...Off topic alert...
Ed Harris has done at least one rifle in 32 ACP.
Now, back to 32 caliber handguns.
Last edited by StrawHat; 11-22-2011 at 07:06 AM.
Knowledge I take to my grave is wasted.
I prefer to use cartridges born before I was.
Success doesn't make me happy, being happy is what allows me to be successful.
<Off Topic>
Keeping things off topic... I have 2 rifles in 32 caliber as well... one is technically .32 long, but shoots .32 acp so well that I might as well call it a .32 ACP that will shoot .32 long.
</Off Topic>
You guys have been posting some sweet looking .32's here!
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
Reviving the Thread so more people will post their 32's
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |