Member needs our help

**DLCTEX** · 11-13-2011, 09:54 PM

I will start the bidding on the Harris bi-pod at $35.

**357maximum** · 11-13-2011, 09:55 PM

Originally Posted by GLL

Michael:

How about a couple more slabs of that Petosky Stone instead?

I will go $80.00 for the point!

Jerry

I have one other one that is only a lil bit smaller.......consider it done.

**leadlober** · 11-13-2011, 09:56 PM

$90.00 for the point

Leadlober

**byronw999** · 11-13-2011, 10:03 PM

Pay Pal sent Dan... Thanks for leading the charge!

**Mumblypeg** · 11-13-2011, 10:58 PM

You know Michael, I think that flat spot in the middle of that point looks like a HEART...

**357maximum** · 11-13-2011, 11:52 PM

Well to be dead honest it pulled at my heart a bit when I pulled it out of the keeper case but I cannot think of a better cause to do so. It is the first point that I have made that made me totally proud of my efforts. That flat spot is where the flake ro make this point used to be married to the mother rock until I hit it with a moose billet to detach said flake.

A pic of side B has been requested and here it is:

**geargnasher** · 11-14-2011, 02:54 AM

See, I told you there was a beautiful point inside that rock, looks like you found it! You're going to make some happy people here with that.

Gear

**dragonrider** · 11-14-2011, 08:53 PM

I will put up this RCBS mold, 7 MM 145 SIL. it is new, unused, still with original protective oil. What may look like rust on the inside corners is said oil. Crappy cell phone pic. Send $70 to Tropper Dan, for this cause, PM your address to me and I will ship on my dime when Dan notifies me of reciept of funds. Be sure to notify Dan of what you are sending him $70 for.

pic is here

**sav300** · 11-15-2011, 03:35 AM

Dragonrider,I would like to purchase the RCBS 7mm mold,but I live in Australia.
If you are interested in posting to Australia.I will pay the postage.
I can pay with paypal.

**dragonrider** · 11-15-2011, 07:19 AM

I will look into it and get back to you, I have sent one or two things to Australia before so should not be a problem.

P.S. Any laws that prevent the importation of boolit molds to Australia????

**sav300** · 11-15-2011, 09:00 AM

Dragonrider, molds are legal with firearms registry and customs.Just do not send brass or projectiles.
The postage is usually around the usd$15 mark.
My post code 2327.

**Mossy Nugget** · 11-16-2011, 11:03 PM

Originally Posted by Gunnerd

For auction; 500 316299s as cast WCWW alloy plus 2% Sn. Drop at .315 +/- .001.

EDIT: These are NOT cast yet; have a few minor projects to finish (shop is a disaster!), and I am starting a new job Monday. Will be a bit busy.

I bid $50.

**dragonrider** · 11-19-2011, 03:34 PM

The mold from post #48 is on the way to Sav300 in Australia. Hope it gets there safe and sound and I hope it does well for him.

**357maximum** · 11-20-2011, 01:22 PM

The mastadon point auction ends tonight. The winner will get a pm from me so that I can get instructions on whether to mount the point or leave it loose to be fondled as the winner wishes. Both Petoskey slabs will be included regardless of how you want it handled.

Thanks for the support,

Michael

**357maximum** · 11-21-2011, 01:23 AM

LeadLober congrats on winning the oooga boooga point. You will have a pm shortly with a few questions. I will ship as soon as I am notified that you donation has arrived.

THANK YOU for your generosity,
Michael

**OeldeWolf** · 11-21-2011, 02:41 AM

357 Maximum, that is a darned nice looking point. Thank you. And everyone.

I need to do my part, so you will all find an 1895 Mauser and accessoriees on sale.

Someone has right of first refusal, but 1 or 2 M96 Swedes and full accessorie kits are next. If I get it done tonight, a pair of enfields are also going up.

As each caliber of firearm leaves, I will put up the dies and such as well. Or if you see one and need everything incl the dies, let me know.

Everyone has gone above and beyond. Thank you all, and God Bless each and every one of you.

Richard

**leadlober** · 11-21-2011, 02:01 PM

Thanks! Check is on the way to Dan. I am offering to donate the point for another round of bidding for OeldeWolf if there is any interest? Be well, friend!

Leadlober

**GLL** · 11-21-2011, 03:16 PM

Leadlober:

Nice offer !

I would send $100 for Michael's point and the Petoskey slabs. The point would be used by our Anthropology Department and the slabs by my own Geology Department.

Jerry

**Throckmorton** · 11-24-2011, 02:59 AM

gift sent via paypal. Happy Thanksgiving everyone !

**SSGOldfart** · 11-24-2011, 12:29 PM

Originally Posted by gray wolf

I can never do much but I always want to try.
A small flat rate box of 45 ACP bullets, # 68 SWC 200 grain from my H&G mold. I think the box will hold Well over 10 pounds of bullets. I just got my check so I will pay the shipping.
Money to TROOPER DAN to above P-Pal Addy.
How about $30.00 BUX ??
Dan will PM me when he gets the funds, you can PM Me and let me know the details.
We don't let our brother's down---no one left behind.

Sam in Maine

gray wolf I'll take a box of them H&G68's please size .451 if you can
trooper Dan my MO will come by snail mail I don't do PP
thanks please let gary wolf know when you have the money

BP	Bronze Point	IMR	Improved Military Rifle	PTD	Pointed
BR	Bench Rest	M	Magnum	RN	Round Nose
BT	Boat Tail	PL	Power-Lokt	SP	Soft Point
C	Compressed Charge	PR	Primer	SPCL	Soft Point "Core-Lokt"
HP	Hollow Point	PSPCL	Pointed Soft Point "Core Lokt"	C.O.L.	Cartridge Overall Length
PSP	Pointed Soft Point	Spz	Spitzer Point	SBT	Spitzer Boat Tail
LRN	Lead Round Nose	LWC	Lead Wad Cutter	LSWC	Lead Semi Wad Cutter
GC	Gas Check

Thread: Member needs our help

Thread Tools

Bid on Litlejack's Harris bi-pod

Arrow Point

Posting Permissions