RepackboxRotoMetals2WidenersSnyders Jerky
Load DataReloading EverythingLee PrecisionInline Fabrication
Titan Reloading MidSouth Shooters Supply
Results 1 to 12 of 12

Thread: Oven Fans?

  1. #1
    Banned

    Join Date
    Mar 2011
    Location
    Oakland County Michigan
    Posts
    1,026

    Oven Fans?

    Does anybody know of a small fan that could be places Inside the oven, to help stabilise the temperature? Anything I have or have considered would likely melt.

  2. #2
    Boolit Master
    Join Date
    Mar 2011
    Location
    Western, MO
    Posts
    629
    A convection fan. But if it doesn't already have one the whole cutting out the back wall and mounting a fan in there would make it a little costly.

    If you have any appliance store around you might be able to find a used oven for little or nothing.

    jim

  3. #3
    Banned

    Join Date
    Mar 2011
    Location
    Oakland County Michigan
    Posts
    1,026
    I was hoping for a do it yourself thing. If I can get a convection oven for free, I would, but otherwise, I'd prefer to just come up with something. Maybe I could put a metal fan blade on a shaft, and run it from a motor on the outside of the stove. Just need a bearing for the shaft to ride as it passes through the stove side or back.

  4. #4
    Boolit Buddy drklynoon's Avatar
    Join Date
    Mar 2008
    Location
    South georgia
    Posts
    425
    This might sound strange or even wrong but have you thought of using the brolier? Broilers are intended to maintain a more constant temperature.
    Nathan

    Casting and reloading novice

  5. #5
    Boolit Master in Heaven's Range
    AZ-Stew's Avatar
    Join Date
    Jul 2006
    Location
    Mesa, AZ
    Posts
    2,006
    Check out the local yard sales, buy yourself a $10 toaster oven and enjoy!

    Read through this thread for the how-to's: http://castboolits.gunloads.com/showthread.php

    The best temperature stabilizer is a metal mass within the oven. You'll need a thermometer (preferably one that uses a thermocouple (long bi-metal wire that changes resistance with heat changes)) so you can tell what's going on inside the oven. Someone posted recently that Sears Craftsman has an inexpensive unit that will work. I just tried a search, but can't find it. Maybe I'll look harder later.

    Regards,

    Stew
    Sig file change:
    "Obi Wan Baloney"
    VOTE 2012! Throw them out! Every last one of them! (Feel free to add this to your sig. Spread the word!)

    "...Get a rope." Pace Picante Sauce commercial, ca. 1984

    "I (did, on several occasions) swear to support and defend the Constitution of the United States, against ALL enemies, foreign AND domestic, and to bear true faith and allegiance to the same." And when I left, they never asked me to recant.

  6. #6
    Boolit Buddy
    Join Date
    Oct 2007
    Location
    Birmingham, Al
    Posts
    106
    Some of the small toaster ovens have a convect setting. Check thrift stores.

  7. #7
    Boolit Master GabbyM's Avatar
    Join Date
    Mar 2008
    Location
    Central Illinois
    Posts
    3,870
    My little toaster oven does not work well at all for heat treat.
    I use my gas oven regularly and it works fine. Except for the time the phone rang and I melted the tin out of a couple thousand 22 bullets. Now I use less heat (425* for 15 minuites ) for little bullets under 30 caliber.

  8. #8
    Boolit Master in Heaven's Range
    AZ-Stew's Avatar
    Join Date
    Jul 2006
    Location
    Mesa, AZ
    Posts
    2,006
    I forgot to mention...

    Turn the oven on and let it come up to temp for 20 minutes or so BEFORE putting the boolits in. Most ovens have a wide swing (too hot) at the beginning until the thermostat catches up with the oven cavity temp.

    Regards,

    Stew
    Sig file change:
    "Obi Wan Baloney"
    VOTE 2012! Throw them out! Every last one of them! (Feel free to add this to your sig. Spread the word!)

    "...Get a rope." Pace Picante Sauce commercial, ca. 1984

    "I (did, on several occasions) swear to support and defend the Constitution of the United States, against ALL enemies, foreign AND domestic, and to bear true faith and allegiance to the same." And when I left, they never asked me to recant.

  9. #9
    Boolit Master BABore's Avatar
    Join Date
    Apr 2005
    Location
    West Michigan
    Posts
    2,039
    I don't think I would be mounting a fan in a gas oven with a pilot light. If it doesn't have a thermocouple and gas safety valve, your asking for it. The only convection ovens I've seen were electric.

  10. #10
    Boolit Buddy
    Join Date
    Jan 2009
    Location
    Socialist Conglomerate of Kanada
    Posts
    100
    Throw a few cast iron frying pans on the bottom rack. It does wonders to smooth out the temperature in the oven.
    Shoot Straight...Shoot Safe
    DrNick

  11. #11
    Boolit Master


    Rick N Bama's Avatar
    Join Date
    Apr 2005
    Location
    In the Heart of N Alabama smack dab along Tornado Alley.
    Posts
    1,132
    Quote Originally Posted by DrNick View Post
    Throw a few cast iron frying pans on the bottom rack. It does wonders to smooth out the temperature in the oven.
    Bricks & Pizza Stones work as well.

    Rick
    Democracy is two wolves and a
    lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting
    the vote. - Benjamin Franklin

  12. #12
    Boolit Buddy
    Join Date
    Feb 2010
    Location
    North East Pennsylvania
    Posts
    487
    I got a toaster oven at Wally world last year it has the convection feature works well for a little under 50 bucks....steg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check