The Magma Air cylinder comes with an air regulator. Is this regulator considered reliable or should I replace it? The pressure reading never seems to get high enouth. I am not sure if it is the regulator's fault or the fault of the air compressor..
The Magma Air cylinder comes with an air regulator. Is this regulator considered reliable or should I replace it? The pressure reading never seems to get high enouth. I am not sure if it is the regulator's fault or the fault of the air compressor..
the regulator's i use from them go up and down.
i don't know if they are regulated or not but the same setting will produce the same results
each time.
mine goes as high as the air in the compressor.
someone else had an issue with thiers recently and airc, they got some teflon tape inside when assembling.
You should make sure that fittings are all sealed with teflon tape. Your air tank or compressor should go over or at 125 lbs to work correctly. For my bullets and lube I use 90 lbs of air. Your air tank should be holding the same amout of air that you put in to start. The Star only uses the pressure and not the air. If you are having to fill your tank or your compressor is running then you have a leak.
Shooter of the "HOLY BLACK" SASS 81802 AKA FAIRSHAKE; NRA ; BOLD; WARTHOG;Deadwood Marshal;Bayou Bounty Hunter; So That his place shall never be with those cold and timid souls who neither know victory nor defeat; 44 WCF filled to the top, 210 gr. bullet
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |