4 Cavity Mihec 44 Brass Hollowbase Wadcutter

[happy7]

This buy is now closed
To sign up for one of these excellent molds, PM me your email address and zip code. I will post your zip code here.

This buy will run till our turn comes up with Mihec. When it does, the buy will be closed and Mihec will send out invoices via paypal to the address you provide me with, so the email you send me should be your paypal address.

Price will be $120 plus $20 shipping for a four cavity brass mold with the Cramer hollowbase system.

A solid version (no cramer system) is available for $85 plus $20 shipping. You must make clear to me that you want the solid version! Make sure I have noted it next to your zip code!

This mold is literally like ten times faster than the old single cavity pin type that Lyman made. If you have a 44, don’t miss out on this.

Here is a graphic of the mold. Target diameter will be your choice of .432 or .434 with WW, so let me know on the PM you send. Weight as a solid will be about 248 grains.



Here is a picture of the 38 mold that was run recently.



Zip Codes

72525 - 432
91106 - 432
96055 - 432
63012 - 434
08043 - 434
63010 - 432
77377 - 432
16255 - 432
75082 - 432
62629 - 432Solid
49331 - 432
24426 - 432
77355 - 432
67005 - 432
71343 - 432
97213 - 432
54235 - 432
91916 - 432
04093 - 432
52732 - 432
98208 - 432
54409 - 432
68601 - 432
37145 - 434

[GLL]

I will take one mould at 0.432".

Jerry

gllewis at pasadena dot edu

[Missoulaz28]

Does this mold have to be a four cavity? I vastly prefer two cav molds.

[happy7]

Right now, Mihec is set up for the four cavities, as they are very poplular at the moment. So only a four cavity is available. Two cavity molds will likely be offered in the future.

Given that hollowbase bullets are usually shot in quantity, four cavity can be a good thing. For myself, I am tickled pink that it is four cavity. But I realize two cavity molds have their strong points as well.

[Missoulaz28]

understood, I might have to ponder this one for a while.

[500bfrman]

can someone tell why I want a hollowbase? what is the advantage?

[hicard]

This would be great for my Bulldog loaded backwards. 1-.432 please. hicardattheskybeamdotcom

[EDK]

I'm in for one at .432. I have the LEE group buy from GLL and the OWBM clone of 429352...and now this one. Talk about having it made!

Hey Missoulaz28...YOU WANT this bad boy in a four cavity! The 38 version casts as fast as a plain base. I am SOLD on brass cramer style moulds....kicking myself for not getting the 434640 since I've cast and shot some from an original LYMAN 2 cavity.

Now I owe for the H&G 503 Keith mould and this one.

[phaessler]

Is there a minimum we need to get this started? Would gown down easier with the or half of the accounting department if I was to hold off until after Christmas..

Pete

[happy7]

Is there a minimum we need to get this started? Would gown down easier with the or half of the accounting department if I was to hold off until after Christmas..

No, it's already started. No minimum was necessary due to the fact the cherry was already in house and the pin order is being combined. It would take an act of God for you to be required to pay before Christmas. See you don't pay till the mold is made. So whether you sign up now or later you pay at the same time. But if you do sign up, you do need to pay when the time comes. This is a firm commitment. I fully understand about the other half. Have the same problem myself.

[GLL]

Back to page #1 !

Jerry

[cephas53]

happy7, excuse my ignorance but can the pins in the cramer system be changed? That is can pins be ordered to also make solids?

[happy7]

All you have to do is reverse the pins to make solids.

[GLL]

Please change mine to 0.432" just in case they come in a little fat !

Jerry

[Dframe]

WOW! Not sure how I missed this one. Put me down for a .432 solid.

[phaessler]

I'm in.... pm sent

0.432" 4 cavity

haesslerpdathughesdotnet


Pete

[happy7]

Solid weight should run about 248 grains.

[Salmon-boy]

Still don't have a .44, but you guys are killing me!! The .38 is such a beauty.. How long is this going to be before it's run?

My toy budget is VERY thin right now, but would like to grab one of these. Stick me on the list for a .432 HB...

[happy7]

Hard to guess how long it will run. I would like to be able to tell you something, but I just don't know. I have asked, but no answer yet.

[EDK]

Please change mine to .434. Zip Code 63012.