Offhand, does anyone know the twist rate of a Rossi Puma .44 Magnum? LSI import, purchased 10/2007. I read somewhere that it may not stabilize a 325 gr boolit. I know how to measure it, just lazy this morning...
Offhand, does anyone know the twist rate of a Rossi Puma .44 Magnum? LSI import, purchased 10/2007. I read somewhere that it may not stabilize a 325 gr boolit. I know how to measure it, just lazy this morning...
My Anchor is holding fast!
I don't know but some scary fairy whispered in all gun maker's ears that 1 in 38" was the way to go.
Mine stabilizes the Lee310 just fine. It is an older Puma with the medallion on the side.
[The Montana Gianni] Front sight and squeeze
My Puma 454 Casull is 1:20 and I believe your 44 mag is too.
Thanks guys...
My Anchor is holding fast!
You can figure out the twist rate without too much trouble. Put a cleaning jag on the cleaning rod with a good tight patch. Mark the cleaning rod where it goes in and several places up the rod. Push it in until the lines meet up again from turning (if possible) or where it turns half way around and measure the distance it took.
Aim small, miss small!
Early Puma guns were 30 twist, independent of caliber. ... felix
felix
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |