Would someone please post the contact info on the JES re-rifling service?
That 22-250 #1 is just crying for reboring to 6.5x57 or .260 Rem
Would someone please post the contact info on the JES re-rifling service?
That 22-250 #1 is just crying for reboring to 6.5x57 or .260 Rem
THank you so very much.
DWS
EDIT: oh ratz and shucky-darn!!!!!! Just googled and found his website, I'll call him later but so far looks like he only does 35 cal and larger work, if his home page is up to date.
time for another plan. Who does good re-rifling in smaller bores? any suggestions?
Last edited by the other DWS; 11-26-2010 at 11:06 AM.
Classic Barrel Works re Dan Pedersen 110 north summitt st prescott az 928 772 4060
A 375 Holland and Holland makes a dandy cast bullet rifle as it. No need to rebarrel or rebore
I have a ruger #1 tropical in 458 win mag that groups under an inch at 100 yds with the lyman 385 gr rn and the brass i am shooting is 30 years old reloaded many many times
the other DWS
Go to Google....type in JES Reboring..hit enter..bingo....you've got everything that you need.
Thanks I appreciate the assistance, I did that, thats how I ofund he didn't do smaller bores. I talked with him yesterday---nothing smaller than .338 at present, so now it on to figuring out a plan B
Plan B, type in "deltagunshop.com" then click on "clearwater reboring". Get all the info you need. Plan on sending a 22-250 Browning B-78 to them for a re-bore to 260 Rem.
Plus when you rebarrel you can order a longer straight section just front of receiver to mount talley bases right on the barrel so as to retain POI, instead of the wandering 1/4 rib. Also shim your forewood so it only contacts around hold down screw and you got a real gun
A system that plain works
Well, folks, I ended up purchasing the 30-06 and the 45-70. The rest of them got away from me before I could raise the funds-
Man, this single shot rifle thing has bit me hard- I recently purchased a beautiful Browning BPCR 45-70 from TexasMac- did I tell you she's a beauty????
Found a little Ruger#3 I think I'll grab, very quickly, as well as a Hoch falling block put together a few years ago by Meacham Tool & Hardware in Idaho- its currently in 17x256win caliber, but it wears a Unertl 16x scope- pricey for sure.
Does anyone know if that Ruger#3 action will make a decent schuetzen rifle???
Oh, man, did I get bit hard!
chuck
358wcf
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |