NOE 35-200 RCBS clone

[rockrat]

Lets get this GB going. Looks like everyone wants a copy of the origional. Need at least 15 to get it going.
One for me, 14 to go.
See if we get enough interest to get this going. If so, I will contact Swede to get it started and an approximate (SWAG)production time.

1. Rockrat 5 cav gc/5cav pb
2. cbrick 5 cav gc
3. blaser.306 5 cav gc paid/noe
4. quigley 284 2 cav 1gc 1pb PAID
5. bcall 4 cav gc paid/noe
6. swiss 96/11 5 cav gc paid
7. ihmsakiwi 5 cav gc paid/noe
8. Gun-adian 4 cav RG4 2gc 2 pb paid/noe
9. kfarm 4 cav gc paid
10.wamin 5 cav gc Paid
11. 358wcf 2 cav gc RG2 paid/noe
12. GLL 1 cav HP + 3 extra pins paid
15. TomKrein 4 gc
16. 376steyr 5 cav gc paid
17. sav300 2 cav gc paid/noe
18. chboats 4 cav gc paid
19. coloraydo 4 cav gc Paid
20. NO34570 2 cav RG 2 Paid/noe?
21. hicard RG2 fryxel pin paid /NOE
24. bear4570 4 cav gc paid
25. sharpshooter3040 5 cav gc. paid
26. Sprue U 5 cav gc paid
27. akpete 2 cav gc paid
28. crash87 2 cav gc paid
29. Euan 2 cav gc paid/noe
30. Suo gan 2 cav gc RG2 Paid
31. cba257 2 cav gc paid
32. Rugerfan 2 cav gc RG2 brass paid
33. KennethF 4 cav gc 1 HP paid/noe
34. ramslammer 2 cav gc RG2
35. castblast 2 cav gc paid
36. crawfobj 2 cav. gc RG2 paid/noe
37. missionary5155 3 cav. gc paid/noe



Swede said prices haven't changed, so

1 cav $68
2 cav $72
3 cav $79
4 cav $85
5 cav $92

HP one cavity $35 addtl.
RG2 $96
RG4 $126
Plus shipping/handling (IIRC $10 U.S.)

Brass moulds: NO LONGER AVAILABLE
1 cav. $90 + $10 shipping USA
2 cav. $94 + $10 shipping USA
RG2 $118 + $10 shipping USA

If you want to do Paypal, contact Swede

[cbrick]

One 5 cav, all GC, no HP

Rick at lasc dot us

The following pic is from an RCBS iron 2 cav just to give those not familiar with the design something to look at. This really is a great bullet design, even my FA revolver will put these into 3-4 inches at 200m and pack quite the whollop doing it.

Rick

[blaser.306]

How be you make that 12 more to go ! put me down for a 5 cavity all gas checked .

[Quigley284]

Alright, I want to try this one in a new conterder barrel, 357 max. 2 cavity one plain base, one gas check, no hollow points. Thanks, Mike

[BCall]

I'm in, 4 cavity. Thanks, Billy

[swiss 96/11]

I am in for a 5-cavity GC. Great boolit been waiting for this one.

[Wayne S]

I've shot both the RCBS and the SAECO # 356, and I prefer the Saeco,it's a tad shorter which helps in wheel guns, the nose is bore riding , and the crimp groove is beveled.
IF the Redding/Saeco, "new & improved" would allow it I would copy a picture of the 356 and post it for compairson. BUT I can supply NOE with samples if needed

[rockrat]

Wayne S, its up to everybody here, what they want. If they want to go with the Saeco design, so be it. Sounds like a good design.

[cbrick]

I'll stick with the RCBS design. If there is enough interest for the SAECO design I'll consider that, possibly as another group buy. For right now we have begun a list of those that have committed to the RCBS design, would throw a wrench into the gears to switch things up now and start all over.

Rick

[ihmsakiwi]

Lets get this GB going. Looks like everyone wants a copy of the origional. Need at least 15 to get it going.
One for me, 14 to go.
See if we get enough interest to get this going. If so, I will contact Swede to get it started and an approximate (SWAG)production time.

Count me in for a five banger with GC. Peter.

[rockrat]

Getting there!!! My 357 max. loves this boolit. Agree, lets keep this to the RCBS clone. The Saeco can be another buy if wanted

[Landric]

I'm in too, 3 cavity 3 GC for me.

Thanks to a deal I worked out with Rockrat I should be shooting this both a Contender and a Handi-Rifle both in .357 Maximum.

[kfarm]

It's only money, besides the wife's on a cruise in the Bahamas with our daughter. Last time she went out of town I bought a new 70hp tractor so put me down for a 3 cavity all GC.

Carroll

[hornsurgeon]

put me down as a maybe.

[rockrat]

6 to go!!!

[wamin]

I'm up for a 5 cav GC, 5 to go!

[cbrick]

I think we need rockrat to start a numbered list in post one of this thread so we can keep track a little easier.

We should, could, maybe, might be at 10 now with one additional still deciding. Let's get a commitment list going like a regular group buy. Post #1 should also include a price list etc.

Rick

[358wcf]

I use this boolit a lot in 35Rem and 358Win, with original rcbs molds. Even had Erik hollowpoint one cavity and remove the GC on another.
I'll gladly acquire another and put it to good use. 3 cavity, please!

358wcf

[Landric]

Rockrat,

Why not start a list of buyers? I always enjoy watching the list grow, and it seems to attract people too.

[cbrick]

List started, thanks rockrat.

For anyone that hunts with a 35 caliber this really is a great bullet design and it's also a perfect candidate for those that wish to HP it. I use it in long range revolver competition and it is a very accurate bullet.

Both of my RCBS 2 cavs of this bullet throw WW at 212 Gr, one of these molds in HP version should be right near 200 Gr.

Rick