Titan ReloadingLee PrecisionReloading EverythingWideners
MidSouth Shooters SupplySnyders JerkyRepackboxLoad Data
RotoMetals2 Inline Fabrication
Results 1 to 6 of 6

Thread: Outstanding results in 375 H&H

  1. 11-03-2010, 09:15 PM #1
    4296
    4296 is offline
    Boolit Buddy
    Join Date
    May 2005
    Posts
    100

    Talking Outstanding results in 375 H&H

    Got around to trying my CZ 375 H&H with CBs after previously firing 50 full powered J word reloads to fireform my brass (ouch!). Lyman 375449 FNGC, sized .377, weighing 283 grains, lube grooves smeared with JPW, seated out so as to not go below the case neck-2.57" OAL. CCI large rifle primers and 1.5 grains of polyester fiber. 33 grains of H4198 gave an average of 1693 fps, while 34 grains gave 1728 fps. Recoil in the heavy rifle was about the same as a 180 grain .308. Accuracy at 50 yards kept all the bullets holes touching (with the rifles iron sights), and to my surprise the point of impact was the same as the full power loads I had fired. The rifle showed no signs of leading after 50 rounds. All in all a very rewarding experience. Now on to my Ruger No 1 in 45-70.
    Reply With Quote Reply With Quote
  2. 11-03-2010, 09:23 PM #2
    nicholst55
    nicholst55 is offline
    Boolit Master
    nicholst55's Avatar
    Join Date
    Jan 2007
    Location
    Houston, TX Metro Area
    Posts
    3,613
    Good deal! Don't you love it when a plan comes together!
    Service members, veterans and those concerned about their mental health can call the Veterans Crisis Line to speak to trained professionals. To talk to someone, call 1-800-273-8255 and Press 1, send a text message to 838255 or chat at VeteransCrisisLine.net/Chat.

    If you or someone you know might be at risk of suicide, there is help. Call the National Suicide Prevention Lifeline at 1-800-273-8255, text a crisis counselor at 741741 or visit suicidepreventionlifeline.org.
    Reply With Quote Reply With Quote
  3. 11-03-2010, 09:30 PM #3
    redneckdan
    redneckdan is offline
    Boolit Master
    redneckdan's Avatar
    Join Date
    Oct 2005
    Location
    Some where on the Iron Range
    Posts
    2,106
    Nicely done. I have found 23.0 gr of Blue Dot to work good with that bullet too.


    If you ever get the hankering to sling some serious lead I would be glad to provide you with some samples and some data I have worked up. I designed this bullet specifically for our CZ safari rifles. http://castboolits.gunloads.com/show...0&postcount=42
    Reply With Quote Reply With Quote
  4. 11-03-2010, 09:44 PM #4
    Hawk
    Hawk is offline
    Boolit Mold
    Join Date
    Feb 2008
    Posts
    17
    That sure is a short 375 H&H- 2.57" OAL
    Reply With Quote Reply With Quote
  5. 11-03-2010, 10:23 PM #5
    4296
    4296 is offline
    Boolit Buddy
    Join Date
    May 2005
    Posts
    100
    My bad- 3.57" OAL
    Reply With Quote Reply With Quote
  6. 11-04-2010, 05:46 AM #6
    Hawk
    Hawk is offline
    Boolit Mold
    Join Date
    Feb 2008
    Posts
    17
    That sounds good now 4296, I have been wanting a CZ 375 H&H for quite sometime to shoot lead in but can't seem to let go of the moola.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check