ATTENTION! A new MiHec four cavity brass mould in .44

[Dale53]

There has been a lot of interest in running the H&G #503 .44 Caliber Keith again, but in a four cavity brass mould. I have "talked" to MiHec and he is prepared to do this for us. It will cost $85.00 plus $20.00 shipping. The minimum number is fifteen. There will be no "beating around the bush" - I will start immediately to sign people up. I will run this for six weeks. Here is what it looks like (MiHec will use the original tooling that he used on the six cavity aluminum mould):





We have "Long bow" to thank for the computer generated picture and drawing.

Good people, this is rare opportunity to get another of MiHec's four cavity brass moulds for this fine Keith SOLID bullet. I have the original six cavity aluminum mould and use it regularly. After using MiHec's brass moulds, I now have a "thing" for them (many of you have expressed the same attitude). This is certainly one of the finest performing Keith bullets available, anywhere, for the .44 Special and .44 Magnum.

Please sign up with your Forum name and Email address (camouflage your Email address as I have done).

The list starts NOW!

1 - Dale53 - rmcgee at zoomtown.com - one mould
2 - Heavy lead - steve cartwright at amerifirst dot com - one mould
3 - chprplt -exit13five at aol dot com - two moulds
4 - Zeus - gswaggart at hotmail dot com - One Mould
5 - Taugust - g99jeb at aol dot com - one mould
6 - GLL - gllewis at pasadena dot edu - one mould
7 - Cast-n-Blast - jeffrey dot hoover at montgomerycountymd dot gov - one mould
8 - John D - wa2eya at verizon dot net - one mould
9 - Ricky P - rickyparchman at yahoo.com - one mould
10 - Matt_G - mgoodrich (at) 4dv (dot) net - one mould
11 - Alamogunr - alamogunr(at)charter(dot)net - one mould
12 - 67bear - gvest67 at yahoo dot com - one mould
13 - Rico1950 - RSB 1913501 at yahoo dot com - one mould
14 - AKtinman - aardvark at netcommander dot com - one mould
15 - ce1911 - dtoman at bis dot midco dot net - one mould
16 - Big Dale - Brimbum at AOL dot com - one mould
17 - 38wcf - cvcooks at astound dot net - TWO MOULDS
18 - GMSharps - gmsharps at cs dot com - one mould
19 - Fowler - bfowler at wescolaser dot com - TWO MOULDS
20 - Fugowii - fugowii at gmail dot com - one mould at .434"
21 - Paulinski - pkrysztofiak at gmail dot com - one mould
22 - Blammer - vmthtr at charter dot net - one mould
23 - 2 dogs - fcgarza 0640 AT hot mail DOT com TWO MOULDS at .434"
24 - Bushwaker - sprayman2007 at comporium dot net - one mould
25 - Lonewelder - lonewelder at msn dot com - one mould
26 - Wots - WotsamtrU at aol dot com - one mould
27 - DGV - deano1860 at aol dot com - one mould
28 - rivane33 - ivanrogers at hotmail dot com - one mould
29 - JDUBS - jessdog19 at hotmail dot com - one mould
30 - 2003Viper - vernhinshaw at northstate dot net - one mould
31 - PH4570 - videodog at comcast dot net - one mould
32 - Gavetta - recka at reckaassociates dot com - one mould
33 - AnthonyB - anthonybennett __ comcast ___ net - one mould
34 - Salmon Boy - salmon-boy using comcast for net - one mould
35 - Von Dingo - marc Underscore montpetit at hot mail dot com - one mould
36 - Body Doc447 - bodydoc447 at aol dot com - one mould
37 - Clyde - cpeer at charter.net - one mould
38 - backed out
39 - captaint - roctober5th at gmail dot com - one mould
40 - newrugersafan - stobbmataoldotcom - one mould
41 - Jeff_WNY - Jeff_WNY - castboolits AT lockport DOT net - TWO MOULDS
42 - SteveP - sjjp at windstream dot net - one mould
43 - EDK....ed dot kayser at yahoo dot com - one mould at .434"
44 - c.r. - carroll.r.adams at gmail dot com - one mould
45 - ddeaton - ddeaton at zoomtown dot com - one mould
46 - joeb4065 - jburson101 at yahoo dot com - one mould
47 - CBH - cwhite86-earthlink-net - one mould
48 - Swindler1 - dandbohio at aol dotcom - one mould
49 - RedHawk357mag - RedHawk357Mag at Gmail dot com - one mould
50 - Doc Highwall - highwall at cox dot net - one mould at .434"
51 - Muckman - pete.connie at live.com - one mould
52 - WMB30 - wmb30atatt.net - pne mould
53 - fivegunner - fivegunner at sbcglobal dot net - one mould
54 - Alex - alexdoug at sbcglobal dot net one mould
55 - IowaFox - slvfx50 at aol dot com - one mould
56 - Bob J - Bob dot Johnson at Invensys dot com - one mould
57 - wdr2 - wrichins at gmail dot com - TWO MOULDS
58 - Rodfac - dloberg at bellsouth dot net - one mould
59 - Manomet - lebconstruction at gmail dot com - one mould
60 - nueces44 - r7277c at yahoo dot com - one mould
61 - DukeinMaine - paypal .... atta .... sebagosales..... dotta ..... com... unications......one mould
62 - Cbrick - Rick at lasc dot us - one mould
63 - Chuckbuster -chuckbuster at Hotmail dot com - one mould
64 - beerloaf - mhickok at gmail dot com - one mould
65 - Swiss 96/11 - bigrockfish7 at aol dot com one mould at .434"
66 - JBLee10 - jblee10 at hotmail dot com - one mould
67 - Harlow Parkenfarker - BDCONNON at PACINFO dot COM - one mould
68 - Farky - fishhawk21(at)hotmail(dot)com - one mould
69 - Oscarflytyer - myerssw at knology dot net - one mould
70 - Daddyfixit - icmacfamily At hOt MaIL Dott cOm - one mould
71 - Shortbbl - shortbbl at gmail dot com - one mould
72 - kirb - kdkirby at icsofidaho dot com - one mould
73 - LAH - lah at suddenlink dot net -TWO MOULDS
74 - johnvid - jvidmar at roadrunner dot com - one mould
75 - 29yearsreload - apalsmei at pixius dot net - one mould
76 - Ramslammer - namovlov at bigpond dot com - one mould
77 - 101VooDoo - 101voodoo at sbcglobal dot net - one mould
78 - wired54 - wired54 at gmail dot com - one mould
79 - sljacob - sljacob at allwest dot net - one mould
80 - canyon-ghost - 3rdshooter at att dot net - one mould
81 - JohnnyCyclone - robertditsimonatcoxditnet - one mould
82 - CPTI - michael dot iannuccilli @ hotmail dot com - one mould
83 - Cadillo - cadillo2 at att dot net - one mould
84 - emj - ejansen2410 at gmail dot com - one mould at .434"
85 - CHBoats - boatmanc at yahoo dot com - one mould
86 - zac0419 - zac0419 at msn dot com - one mould
87 - pack3480 - dcasad at hotmail dot com - TWO MOULDS
88 - Calehedron - kenneth dot ferry at gmail dot com - one mould
89 - Practical Man - 1practical [dot] man [at] gmail [dot] com - one mould
90 - Fobis01 - csmith3 at vtown dot com dot au - one mould
91 - Blazenet - Blazenet AT Comcast dot net - one mould
92 - Mal Paso - 429421 at gmail dot com - one mould
93 - Cats - one mould
94 - MtMark45 - mlkeith 45@ aol.com - one mould
95 - foxtrotter - foxtrotter at rtci dot net - one mould
96 - That'll Do - bron_yr_aur (at) comcast (dot) net - one mould
97 - Eastwa - eastwa78 (AT) msn (DOT) com - one mould
98 - Mak Rov - gmctrk at comcast dot net - one mould
99 - sleeper 1428 - sleeper1428 at charter dot net - one mould
100 - JimmyDee - jdavitt at gmail . com - one mold
101 - donnie45 - donniem at macc dot edu - one mould
102 - Patman - jeepat3atqdotcom - one mould
103 - USAF SHIRT - prkaiser1 (at) yahoo (dot) com - one mould
104 - Bpost1958 - bpost58 at Frontier DOT com. - one mould
105 - Dang - adgrime at catt dot com - one mould
106 - critterkillr - krslates at live dot com - one mould
107 - gunsbrad - bradhurt2 at yahoo dot com - one mould
108 - hamour - hank (dot) austin (at) saudichevron (dot) com - one mould
109 - Alan - aatwood2 at tx dot rr dot com - one mould
110 - Gregger - socr4all at yahoo dot com - one mould
111- Retired Navy - jwmoore at sbcglobal dot net - one mould
112 - 310Pilot - jimflys310 at yahoo dot com - one mould
113 - Onty - ibcdiesel at netscape dot net - one mould
114 - lurch - kurthesse at embarqmail dot com - one mould at .434"
115 - 500bfrman - merrilllangs at gmail dot com - one mould - .434"
116 - breathed - breathed99 at yahoo dot com - one mould
117 - sargeny1 - Sargeny1 at verizon net - one mould
118 - tcart - tcart at hotmail dot com - one mould
119 - Sliphammer - salmtruttaataoldotcom - one mould
120 - badluther - boomercowboy at gmail dot com - one mould
121 - 44 Shooter - ajspan at msn dot com - one mould
122 - Potsy - brianwestwwathotmaildotcom - one mould
123 - man.electric - jimbighed at yahoo dot com - one mould
124 - MGySgt - MGySgt4099@Hotmail.com - one mould
125 - DLM - miller448 at aol dot com - one mould
126 - Back Woods Billy - wjcampbell1954 at yahoo dot com - one mould
127 - Sagebrush7 - jamessage at bellsouth dot net - one mould
128 - Ilwil - william.bentler1 at frontier dot com
129 - bburnz - bburnz at pixius dot net - one mould at .434"
130 - Princeout - princeout at sbcglobal dot net - one mould
131 - Rogsir - rogsir at gmail dot com - one mould
132 - Garand 4 - douglee55@hotmaildotcom - one mould
133 - dr-reloader - one mould
134 - hporter - hporter 67 at mac dot com - one mould
135 - was1911 - was1911 at bellsouth dot net - one mould
136 - Ward 0 - wolson at rfgdistributing dot com - one mould
137 - Suo Gan - randolphscott257 at gmail dot com - one mould
138 - CHD - codyhuck at gmail dot com - one mould
139 - CSH - showard at newsguy.com - one mould at .434"
140 - 500ASquare - tphilgig at yahoo dot com - TWO MOULDS
141 - idmcrook - mjcrookston at msn.com - one mould
142 - johnny356mr - johnandsuzi at msn dot com - one mould
143 - swissham - johnbrown -at- triad-dot-rr-dot-com - one mould
144 - M-Tecs - jjkar15 at comcast dot net - one mould
145 - buckndee - 2hunters2 at comcast dot net - one mould
146 - mike454 - mike454 at gmail dot com - one mould
147 - GMW - GMW harley2002 at epix dot net - one mould
148 - akriet - akriet at bellsouth dot net - one mould
149 - 4719dave - davebz63 at aol dot com - one mould
150 - reader - reader452 at gmail dot com - one mould
151 -




Dale53

[Heavy lead]

I'm in, as noted before, his aluminum is my favorite and my 44's favorite mould.

[chprplt]

I'm in for two, maybe a third as a gift. thanks Dale.

[chprplt]

Sorry, I got excited....
chprplt, exit13fiveataol.com, two molds, plain base

[Dale53]

chprplt;
Yep! This is all your fault! Truth is, I wanted it to happen, also.

Heavy Lead - we need your camouflaged Email address.

Dale53

[Heavy lead]

steve cartwright at amerifirst dot com

[Zeus]

I'm in for two. Thanks again Dale!

gswaggart at hotmail dot com

[taugust]

I'll take one!

g99jeb at aol dot com

Thank you.

Tom

[GLL]

One for me as well !

Jerry

[Dale53]

Zeus: you are in for two moulds.

Taugust - you are in for one mould.

GLL - you are in for one mould (I thought I would see you here, Jerry By the way, I need your current Email address (please camouflage it like the others).

Good show, good people. It looks like this one is rollin'!

Dale53

[500bfrman]

when would this need to be paid for. said run the gb for six weeks. that puts at about thanksgiving.

[DukeInFlorida]

Unlike the NOE molds, M-P Molds will send you an invoice DIRECTLY when the molds are finished, and that's when you pay.

I like that system a lot, and hope that it eventually becomes the way NOE also does their molds.

when would this need to be paid for. said run the gb for six weeks. that puts at about thanksgiving.

[500bfrman]

I know my problem is I am just so overspent and most of it to Mihec. I bout one of the 434640 or something like that overruns. I am in for both of the 500 smith molds right now. I bought four guns in august, and one on layaway, out next month. If we think this will be done this year I can't get in. but if it crept into january I am in.

[cast-n-blast]

Dale, I'm in ! hoover0588 at aol dot com

[John D]

I missed the original 6 cav. aluminum mould. I'm not gonna miss this one!

Put me down for one mould.

wa2eya at verizon dot net

[RP]

Dale this is one of the best easiest to read buy I seen cut and dry I would like one also
rickyparchman at yahoo.com Hes got to stop making molds for awhile so I can regroup just got one two more in the mail coming my way now this one. I also like the way he takes payment Keeps it in a two party deal less to get confused or lost. Thanks dale.

[GLL]

Dale:

Thanks for running this one !

Jerry

gllewis at pasadena dot edu

[Hickory]

Boy, I'd like to get in on this , but I don't have a paypal account and do not want to get a paypal account.
I e-mailed MiHec once about taking an international money order, but recieved no reply.
Oh, well. I guess I miss out again.

[Matt_G]

Hickory, you can pay Mihec via AlertPay as well.
Take a look and see if that would be a viable option for you.

[Dale53]

Dale:

Thanks for running this one !

Jerry

Happy to do it, Jerry.

Hickory;
Would sure like to have you aboard. I find PayPal to be as easy as can be. I give them my credit card number and that's all there is too it. It's simple and easy and costs me nothing. I realize that they ask for your bank information - I don't give them my bank information. No problem whatsoever. MiHec gets his money instantly and I get my mould at the earliest possible time.

If you change your mind, let me know and I'll get you on the list.

Dale53