Brian,
Being one of those die orders you're working on, I too will want to add these to my swaging bench.
Bob
Brian,
Being one of those die orders you're working on, I too will want to add these to my swaging bench.
Bob
Last edited by BwBrown; 10-24-2010 at 11:41 PM.
OK Guys,
I'm moving foward. Just placed first order for 7 of the blank dies to use for this universial notching die. Should be here in about a week, then a week or so for me to make the parts. I'll start an official waiting list soon as well as figure intial cost. Won't be long now. I would have ordered a few more then 7 but that's what was in stock. I can order more later depending on demand.
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Here is what I see for the waiting list so far. This is by no means an obligation to buy yet and I still have to figure final cost.
Thanks
BT
Universial notching die unofficial waiting list in no piticular order. Dies will be shipped in order of funds recieved as soon as I make them avialble.
1. ReloaderFred
2. Airmung
3. Buck1
4. Nicholist55
5. MakeMineA10mm
6. BWBrown
7. Jailer
8. Ervin
9. Harley45
10. Uncleskippy
11. Torker
12. Mold Maker
Last edited by BT Sniper; 11-18-2010 at 08:54 PM.
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
I'm in!!!!
Group Buy Honcho for: 9x135 Slippery, 45x200 Target (H&G68), 45x230 Gov't Profile, 44x265 Keith
E-mail or PM me if you have one of the following commemorative Glocks you'd like to sell: FBI 100yr, Bell Helo, FOP Lodge1, Kiowa Warrior, SCI, and any new/unknown-to-me commemoratives.
I'm definitely in, too.
Service members, veterans and those concerned about their mental health can call the Veterans Crisis Line to speak to trained professionals. To talk to someone, call 1-800-273-8255 and Press 1, send a text message to 838255 or chat at VeteransCrisisLine.net/Chat.
If you or someone you know might be at risk of suicide, there is help. Call the National Suicide Prevention Lifeline at 1-800-273-8255, text a crisis counselor at 741741 or visit suicidepreventionlifeline.org.
The list continues! I can always put together more so don't feel like this initial 7 is it. I'll keep you all posted.
Swage On!
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
I can hardly wait!
NRA LIFER .. "THE CAST BULLET HANDLOADER IS THE ONLY ONE THAT REALLY MAKES ANY OF HIS AMMUNITION. OTHERS MEARLY ASSEMBLE IT". -E.H. HARRISON
----------------------
"Those who hammer their guns into plows will plow for those who do not."
Thomas Jefferson
------
"Government is not a solution to our problem, government is the problem."
-- Ronald Reagan
Please include me on your waiting list. Thanks, Ervin
Add me to the waiting list also please
See Some of My Holster Work Here:
www.whitetigerleatherworks.com
Please add me to the list
Skip
Arguing with an Idiot makes you an idiot
My Grandpa
Recieved the first 7 dies today. I still need to make the necessary parts to complete this set up. I want to fill you all in on exactly what it is you will be recieving. I'll take some pics too I'm sure. What I start with is a slightly modified Redding 40S&W/10mm expander die. Then I make the custom notch punch insert and the rounded concaved insert to fit. It is still able to work as intended for belling the mouth of 40 S&W cases as well. These punches are held in the die by the same 1/2-20TPI thread as the expander but will have to be installed and removed from the base of the die. Not to worry the simplicity of this die will not be a problem as well as the quality. There was other possible dies that could have worked and I looked them over, but I have allways been pleased with Redding quality. Should you wish to use this die for a sizing die as well, the bore diameter will be just about .500 so a flanged 1/2" drill bushing would fit in the base.
As far as holding the bullet on the ram goes, if your bullet has a rim like our bullets from brass then usually a shell holder of appropriate size works great otherwise any flat base punch that you are using for swaging will work just fine. Because of the internial design the bullet will self allign in the die. I do not plan to offer a shell holder or this base punch as it is somthing you all should allready have but then again if you wish for additional cost I can do so just let me know.
I do not plan to offer the internial components seperate from the 40 expander die should you allready have one. As I will be boring the die out to .500 these internial punches would not fit without modification to stock dies anyways.
I still hesiate to quote a cost just yet as I still need to make the punch. That notch punch does take a bit of work to cut by hand. Maybe I can figure it out on the mill, we shall see. I stocked up on material to offer a varrity of HP punches to allow the many different possible bullet combinations as well.
I will have caught up on my current die orders by end of this weekend and will possibly have time to work on these universial notch dies as well. When I get a better idea of amount of labor involved I will quote you all a price and then ship in order of funds recieved.
I'll keep you all posted.
Thanks
BT
Last edited by BT Sniper; 11-18-2010 at 08:49 PM.
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Brian,
Please put my name on the list also for this... Thanks
Brian,
Sent you a check today. It's just so you have some working funds and not pay for all this stuff up front out of your pocket for me. Call it a down-payment... When you come up with a final price and let us know, I'll send you the balance.
Group Buy Honcho for: 9x135 Slippery, 45x200 Target (H&G68), 45x230 Gov't Profile, 44x265 Keith
E-mail or PM me if you have one of the following commemorative Glocks you'd like to sell: FBI 100yr, Bell Helo, FOP Lodge1, Kiowa Warrior, SCI, and any new/unknown-to-me commemoratives.
Bought out midway again. I have enough dies now for 13 orders and as before I can certainly order more.
I spent some time in the machine shop this weekend. Got the initial 7 dies bored out and began work on the internial punches. I will be ordering the necessary tool to cut the perfect teeth for the notch insert using a mill. It should produce results that will be even better then anythign I have ever posted pics of. This has always been my plan in that I would not sell you guys anything unless it is better then what I have in use for myself. This set up will certainly be all that.
Did I mention this die works great for making Glazers too!
I still see no problem having all 13 of these dies ready by Christmas and possibly sooner.
It will certainly be worth the wait.
Thanks guys I'll keep you posted.
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Set the intro price! I will accept payments now at any time and expect first 13 orders to be delivered in time for Christmas. As always quality will come first should there be any delay. I'll send out PMs to the 12 of you who have posted intrest. I'll ship completed dies in order of funds recieved. Anyone else is free to PM me as well with intrest.
Thanks
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
PMs sent!
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Reply sent and check is written!
Thanks, BT.
Fred
The check is in the mail headed your way.
Ordered specific cutter today to fit mill so the notch punch will be perfect.
Additional HP punches for the CH dies will be avialble too.
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |