Im looking for a midrange load for this for my blackhawk. I have a bunch of unique and would like to shoot that. My heads are 286 gns out of the mold. Looking to knock over some steel without burning a hole in the air.
Mark Hogan
Im looking for a midrange load for this for my blackhawk. I have a bunch of unique and would like to shoot that. My heads are 286 gns out of the mold. Looking to knock over some steel without burning a hole in the air.
Mark Hogan
Once a wheelweight, now its makin holes
Hello,
http://castboolits.gunloads.com/arch...hp/t-1655.html
http://www.snowflakesinhell.com/2008...oading-advice/
http://www.thehighroad.us/archive/in.../t-362547.html
Fun stuff is 7 to 8 grains of UNIQUE
That is a 44 Mag SUPER Blackhawk, right ??? and not a 44 Special Black Hawk or a 44/40 Blackhawk??
http://www.thehighroad.org/archive/i...p/t-28774.html
Mike
Last edited by skeettx; 08-23-2010 at 03:52 PM.
What's a head?
Do you mean boolit?
Political correctness is a national suicide pact.
I am a sovereign individual, accountable
only to God and my own conscience.
Thanks for the info.
I have a super blackhawk in 44 mag and a new flat top 44 special both are 4 5/8" guns. I use 7 and 7.5 of unique with the 250 Kieth's but was at a loss for the 285 grain bullet. I may start with a light load for a 300 and work it up on the chrono.
Heads are bollits - leadheads on a brass case
Once a wheelweight, now its makin holes
Hello
Thanks
Here is my fun/hunting 44 Mag, I wanted a short 4 5/8th many years ago and they did not make one, so here is what happened
Enjoy the day
Mike
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |