434640-PB Load needed

[knothead]

Im looking for a midrange load for this for my blackhawk. I have a bunch of unique and would like to shoot that. My heads are 286 gns out of the mold. Looking to knock over some steel without burning a hole in the air.

Mark Hogan

[skeettx]

Hello,

http://castboolits.gunloads.com/arch...hp/t-1655.html

http://www.snowflakesinhell.com/2008...oading-advice/

http://www.thehighroad.us/archive/in.../t-362547.html

Fun stuff is 7 to 8 grains of UNIQUE

That is a 44 Mag SUPER Blackhawk, right ??? and not a 44 Special Black Hawk or a 44/40 Blackhawk??

http://www.thehighroad.org/archive/i...p/t-28774.html

Mike

[Hickory]

What's a head?
Do you mean boolit?

[knothead]

Thanks for the info.

I have a super blackhawk in 44 mag and a new flat top 44 special both are 4 5/8" guns. I use 7 and 7.5 of unique with the 250 Kieth's but was at a loss for the 285 grain bullet. I may start with a light load for a 300 and work it up on the chrono.


Heads are bollits - leadheads on a brass case

[skeettx]

Hello
Thanks

Here is my fun/hunting 44 Mag, I wanted a short 4 5/8th many years ago and they did not make one, so here is what happened





Enjoy the day
Mike