I finally finished putting together a steel plate, plinker, hunter 10/22 from parts that I had. Here's what I did.
Radiused the bolt, polished, and pinned the firing pin
Pinned the reciever, trigger group and stock together
Extended magazine release
Hogue Overmolded stock
MarineTex'd in a piece of all thread in the forend to stiffen for bi-pod use
Cheekpiece from AR
Shilen barrel
Trigger group from a Clark gun
Volquartsen barrel scope mount
Powers extended bolt handle
UltraDot Pan AV sight
http://www.ultradotwest.com/ultradot_2008_008.htm
Should be a pretty fun gun. I wanted a different gun than my McMillian Stocked Team Challenge gun in my avatar.